User's Manual

www.i-sens.com
16
Step 10
In this mode all the test results stored in the meter can be deleted.
Please note that if you select YES, all the stored test results will be
deleted and can not be restored.
After the beeper mode is set, press
the
S button to enter the ‘Test Result
Reset’ mode. The ‘dEL’ character will
blink on the screen. Press 󱈻 or 󱈼
to alternate between ‘YES’ or ‘no’.
To delete all the stored test results
press the S button while the screen
displays ‘YES’. Then, all the test
results stored in the meter will be
deleted and the screen will be similar to the picture on the right.
If you do not want to delete the results press the
S button while
the screen displays ‘no’. Then, the screen will return to step 2.
See page 12.
At any stage, if the S button is pressed for 3 seconds, Time, Date
and Unit setting mode will finish and the meter will be turned off.
Press and hold 󱈼 to scroll through numbers quickly.
Note
Setting the ‘Test Result Reset’
(Deleting all the saved test results)
www.i-sens.com
17
Step 9 Setting the Bluetooth
In this mode all the test results stored in the meter can be deleted.
Please note that if you select YES, all the stored test results will be
deleted and can not be restored.
After the beeper mode is set, press the
S button to enter the ‘Test
Result Reset’ mode. The ‘dEL’ character will blink on the screen.
Press 󱈻 or 󱈼 to alternate between ‘YES’ or ‘no’. To delete all the
stored test results press the S button while the screen displays ‘YES’.
Then, all the test results stored in the meter will be deleted and the
screen will be similar to the picture on the right.
If you do not want to delete the results press the
S button while
the screen displays ‘no’. Then, the screen will return to step 2.
See page 12.