User's Manual

www.i-sens.com

Press 󱈻 or 󱈼 until the correct hour appears.

After the hour is set, press the S button to enter

the minute setting mode.

Step 6 Setting the Hour

Press 󱈻 or 󱈼 until the correct minute appears.

After setting the minute, press the S button to

enter the unit setting mode

Step 7 Setting the Minute

The unit setting on the meter may be fixed for your meter, so that

you may not be able to change the setting.

Note

On pressing 󱈻 or 󱈼, the screen will display the

On or OFF. Press the S button to confirm the

selection.

The meter will beep in the following instances, if

set to On.

•When the test strip is inserted in the meter

• When the blood sample is absorbed into the

test strip and the test starts

•When the test result is displayed

•When you push the S button or 󱈻 button to

check the memory

• When you push the 󱈻button to set the post-

meal (PP2) alarm

•When it is time for a preset blood glucose test

If the sound is set to OFF, none of the sound

functions will work.

Step 8

Only when the sound is set to OFF,

icon appears on the

display.

Note

Setting the Sound On/OFF