User's Manual

www.i-sens.com
13
www.i-sens.com
12
Setting up Your System
Press and hold the S button for 3 seconds to switch on the meter.
After all settings are finished, press and hold the S button for 3
seconds to turn off the meter.
Press 󱈻 or 󱈼 to reach the accurate value. Press and hold the 󱈻 or
󱈼 to scroll faster.
Press and hold the
S button for 3 seconds to
switch on the meter. After all the segments flash
across the screen, the ‘SET’ character icon will be
displayed on the screen.
Press the S button again to enter the year setting
mode.
Step 1 Entering the SET Mode
The number that appears on the screen after
the meter is turned on indicates the year of
manufacture. Press and release 󱈻 or 󱈼 to adjust
until the correct year appears. Press and hold 󱈼
button to scroll through the numbers quickly. After
setting the year, press the S button to confirm your
selection and enter the month setting mode.
Step 2 Setting the Year
Adjusting the Date, Time and Unit
A number indicating the month will be blinking on
the left corner of the screen. Press 󱈻 or 󱈼 until
the correct month appears. Press the S button to
confirm your selection and enter the date setting
mode.
Step 3 Setting the Month
Press 󱈻 or 󱈼 until the screen displays the correct
date. Press the S button to confirm the date and
enter the time setting mode.
Step 4 Setting the Date
The meter can be set in the AM/PM 12-hour or the
24-hour clock format. Press 󱈻 or 󱈼 to select a
format. The AM•PM icon is not displayed in the
24-hour format. After selecting the format press
the S button to enter the hour setting mode.
Step 5 Setting the Time