User's Manual

www.i-sens.com
38
Step 1
Without inserting a test strip, press
󱈻
and
the S button simultaneously for 3 seconds to
enter the time alarm mode. The ‘alarm1’ will be
displayed while the ‘OFF’ character blinks on
the screen.
Step 2
On pressing 󱈼, the ‘alarm1’ is set and the ‘On’
character is displayed on the screen. Press 󱈼
again to cancel the ‘alarm1’. The ‘OFF’ icon will
blink on the screen .
Setting the Time Alarms (alarm1 ~ 3)
Step 3
Press
󱈻
to adjust the time of the ‘alarm1’.
A number representing the time will blink on
the screen. Press 󱈼 to set the time.
Press
󱈻
to end.
www.i-sens.com
39
Step 4
On pressing
󱈻
, the number indicating the
minute will start blinking. Press 󱈼 to set the
accurate minute.
Step 5
Press the S button to finish and to enter the
‘alarm 2’ mode.
Repeat steps 2 to 5 to set the remaining time
alarms (alarm 2 ~ 3).
Step 6
Press the S button for 3 seconds to finish and
turn the meter off.