User's Manual

www.i-sens.com
36
Step 3
Use the 󱈼 button to scroll through the test results, starting from the
most recent and ending with the oldest. Press
󱈻
to return to the
result seen previously.
After checking the stored test result, press the S button to turn off the
meter.
On pressing 󱈼, the latest test result saved in the meter’s
memory will be displayed on the screen along with the date and
time. Press and hold 󱈼 to scroll through the test results.
Note
www.i-sens.com
37
Setting the Alarm Function
Four types of alarms can be set in the CareSens N meter: one post-
meal alarm (PP2 alarm) and three time set alarms (alarm1 ~ 3).
The PP2 alarm goes off 2 hours after setting the alarm.
The alarms ring for 15 seconds and can be silenced by pressing
󱈻
,
󱈼 or the S button or by inserting a test strip.
Step 1 Setting the PP2 alarm On
Without inserting a test strip, press
and hold
󱈻
for 3 seconds to set the
post-meal alarm. The ‘PP2’ character,
the bell (
) icon and then the ‘On’
character will be displayed. The
screen will then automatically change
to the memory check mode. At this
time, the bell ( ) icon, indicating
that the PP2 alarm has been set, will
be displayed on the screen.
Step 2 Setting the PP2 alarm OFF
To turn off the PP2 alarm, press
and hold
󱈻
for 3 seconds. The
‘PP2’character, the bell (
) icon
and then the ‘OFF’ character will
appear on the screen. Then the
screen will change automatically to
the memory check mode without the
bell ( ) icon being displayed.
Setting the post-meal alarm (PP2 alarm)
icon vanishes