User's Manual

www.i-sens.com
24
Unscrew lancing device tip.
Wash hands and fingertip sample site
with soap and warm water. Rinse and dry
thoroughly.
Firmly insert new lancet into carrier.
Hold lancet firmly. Gently twist to pull off
protective disk. Save disk to recap lancet
after use. Replace lancing device tip.
Preparing the Lancing Device for Blood Sample Retrieval
Step 1
Step 2
Step3
www.i-sens.com
25
To cock the lancing device, hold the tip in
one hand. Pull the sliding barrel on with the
other hand. The lancing device is cocked
when you feel a click.
Select a desired depth of one-to-five (1-5)
on lance’s adjustable tip. Rotate ring to
align desired number with arrow.
A beginning setting of three (3) is
recommended.
Step 4
Step 5
The skin depth to retrieve samples will vary for various people at
different sample sites. The lance’s adjustable tip allows the best
depth of skin penetration for an adequate sample size.
A beginning setting of three (3) is recommended.
Note