User's Manual

36 37
CHARGING MENDOR SMART BLOOD GLUCOSE METER
Step 1
Connect the end of the micro USB cable to the meter charging port. Then plug the
other end of the cable to the USB port on your computer or other powered USB
socket. The meter charging port is located on the bottom of the meter. Once the
micro USB cable is plugged in, the meter displays USB connection status as below.
Once the meter is connected, it is going to start charging and the charging icon will
be displayed on the screen.
Plug into the meter’s
Charging port
Plug into your
computer
CHARGING MENDOR SMART BLOOD GLUCOSE METER
Step 2
Mendor SMART Blood Glucose Meter displays the battery status with 6 image
Battery status
Battery status
0 - 10 %
41 - 80 %
11- 20 %
81 - 99 %
21 - 40 %
100 %
Without
charging
(Status bar)
Without
charging
(Status bar)
With charging
(Whole Display)
With charging
(Whole Display)
When the meter is on, the battery icon is shown in the top right corner.
The icon shows the battery power status.