Quick Start Guide

8
READ OF TRANSPONDERS
Hold the top of the device near to a transponder and make a short press on [Key 1].
If the transponder can be read, the display will indicate the transponder type and
the UID and the device gives a short vibrate.
If there is no transponder in reading area, the display will indicate “NO TAG” vibrate
in a longer sequence.
The multipen will indicate automatically supported transponders as follows:
LF 125/134 kHz: EM 41xx, EM 42xx, HTS, FDX-B, HDX
HF 13,56 MHz: ISO 15693, ISO 14443, NFC
UHF 860 MHz … 960 MHz
BLUETOOTH CONNECTION
Turn the I S-M P.2 ON [On/O Key]. Press [Key 2] for turn On and O the Bluetooth
function. For pairing with other devices push and hold [Key 2]. The Display will
indicate “Pairing Bluetooth …” and after successful pairing the IS -MP. 2 will be listed
as RNBT-E5D5 in paired Bluetooth device.
The display of the IS -MP. 2 will indicate “End of pairing”. For existing connection
the display of the IS -M P. 2 indicate a BT icon top right. For lost connection the BT icon
will be framed.
READ TRANSPONDERS ON PC OR ANDROID™ DEVICE
For reading the transponders via Bluetooth you have to install “WINDOWS
TIDMULTIPEN V.1.x” on PC. For Android device install the application
“TECTUS MultiPen” available on Google Play™ Store.
HUMAN INTERFACE DEVICE (HID)
Powering O and connect the I S-MP.2 with the delivered USB cable to the
USB port on your PC. The display of the I S-MP.2 lights up and indicate an USB icon
on top right of the display.
Open an Excel sheet and read a transponder. The UID of the transponder
will be imported automatically to any position of cursor on PC.
8
READ OF TRANSPONDERS
Hold the top of the device near to a transponder and make a short press on
[Key 1]
.
If the transponder can be read, the display will indicate the transponder type and
the UID and the device gives a short vibrate.
If there is no transponder in reading area, the display will indicate “
NO TAG
” vibrate
in a longer sequence.
The multipen will indicate automatically supported transponders as follows:
LF 125/134 kHz:
EM 41xx, EM 42xx, HTS, FDX-B, HDX
HF 13,56 MHz:
ISO 15693, ISO 14443, NFC
UHF 860 MHz … 960 MHz
BLUETOOTH CONNECTION
Turn the
IS - MP. 2
ON
[On/O Key]
. Press
[Key 2]
for turn On and O the Bluetooth
function. For pairing with other devices push and hold
[Key 2]
. The Display will
indicate “
Pairing Bluetooth …
” and after successful pairing the
IS - MP. 2
will be listed
as
RNBT-E5D5
in paired Bluetooth device.
The display of the
IS - MP. 2
will indicate “
End of pairing
”. For existing connection
the display of the
IS - MP. 2
indicate a BT icon top right. For lost connection the BT icon
will be framed.
READ TRANSPONDERS ON PC OR ANDROID™ DEVICE
For reading the transponders via Bluetooth you have to install “
WINDOWS
TIDMULTIPEN V.1.x
” on PC. For Android device install the application
“
TECTUS MultiPen
” available on Google Play™ Store.
HUMAN INTERFACE DEVICE (HID)
Powering O and connect the
IS - MP. 2
with the delivered USB cable to the
USB port on your PC. The display of the
IS - MP. 2
lights up and indicate an USB icon
on top right of the display.
Open an Excel sheet and read a transponder. The UID of the transponder
will be imported automatically to any position of cursor on PC.