Quick Start Guide

EN 7
BATTERY
The battery in this device is not removable by the user. The battery is not fully charged
when the device is purchased, but it contains enough energy to power on the device.
To obtain best battery performance and battery life, let the battery discharge comple-
tely before charging it completely for the  rst three charging cycles.
CHARGING THE BATTERY
Connect the USB cable with the USB connector at the bottom of the device.
Connect the other side of the USB cable with the socket of the power supply.
After charging, remove the USB cable from the charger.
BATTERY USE
In actual use the run time of the device varies with the working environment and usage.
Please charge low battery; otherwise you may lose any  les which are not saved.
WARNING
The device may only be charged at ambient temperatures in a range from 5 °C … 35 °C.
Please do not use charging equipment if the temperature exceeds this range.
KEYS AND SPECIAL FEATURES
(see illustration on page 2)
1 KEY 1: To read transponders.
2 KEY 2: For several Bluetooth function.
3 ON/OFF KEY: Short press to power On/O the device.
4 USB PORT: HID (Human Interface Device) and to charge the battery.
Do not open the USB port in hazardous areas!
POWERING ON AND OFF THE IS-MP.2
To powering ON the device, press the [On/O Key].
The screen lights up and the device is in running order.
For powering O the device, press the [On/O Key].
The display indicates a 3 second countdown and turn o .
EN
7
BATTERY
The battery in this device is not removable by the user. The battery is not fully charged
when the device is purchased, but it contains enough energy to power on the device.
To obtain best battery performance and battery life, let the battery discharge comple-
tely before charging it completely for the  rst three charging cycles.
CHARGING THE BATTERY
Connect the USB cable with the USB connector at the bottom of the device.
Connect the other side of the USB cable with the socket of the power supply.
After charging, remove the USB cable from the charger.
BATTERY USE
In actual use the run time of the device varies with the working environment and usage.
Please charge low battery; otherwise you may lose any  les which are not saved.
WARNING
The device may only be charged at ambient temperatures in a range from 5 °C … 35 °C.
The device may only be charged at ambient temperatures in a range from 5 °C … 35 °C.
Please do not use charging equipment if the temperature exceeds this range.
KEYS AND SPECIAL FEATURES
(see illustration on page 2)
1
KEY 1:
To read transponders.
2
KEY 2:
For several Bluetooth function.
3
ON/OFF KEY:
Short press to power On/O the device.
4
USB PORT:
HID (Human Interface Device) and to charge the battery.
Do not open the USB port in hazardous areas!
POWERING ON AND OFF THE IS-MP.2
To powering ON the device, press the
[On/O Key]
.
The screen lights up and the device is in running order.
For powering O the device, press the
[On/O Key]
.
The display indicates a 3 second countdown and turn o .