Certificates

IA Number: MTEx-M/20.0014 X
Rev.0
Page 3 of 3
Template: MTExDOC101 Rev 5
Approve date :(2019/06/11)
4. DOCUMENTATION PROVIDED
 IECEx Quality Assessment Report (DE/EPS/QAR12.0003/07)
 IECEx Certificate of Conformity (IECEx EPS 19.0063 X)
5. SPECIAL CONDITIONS OF USE (X)
The battery may be charged and replaced outside explosion hazardous areas only.
The device must be protected from impacts with high impact energy, against excessive UV
light emission and high electrostatic charge processes.
The device shall be protected from the exposure of oils, greases and hydraulic fluids.
The permitted ambient temperature range is -20 °C to +60 °C
6. MARKING
For validity purposes, the following marking must be added to all equipment covered by this
certificate:
Manufacturer: i.safe MOBILE GmbH
Supplier: i.safe MOBILE GmbH
Equipment: Intrinsically safe industrial tablet.
Model/Type: IS930.M1
IA Number: MTEx-M/20.0014 X
Ex Rating: Ex ia I Ma IP64
Serial No.: All units imported between Issued and Expiry dates.
Note 1: It is the responsibility of the supplier to ensure that the marking label complies with
the ARP 0108: 2014.
Certificate Issued by: Authorized by:
D. Young, Testing Officer. H. De Wet, Editor.
MTEx Laboratories
Note: This document may not be reproduced except in full.
MTEx Laboratories takes no responsibility for any non-conforming tests / assessments / results which is not in
compliance with the relative Standards. By marking the equipment as mentioned in the documentation, the manufacturer
takes full responsibility that the equipment has indeed complied with the original type assessment and has been
subjected to any routine verification(s) / test(s) respectively.
End of Certificate