Certificates
IA Number: MTEx-S/20.0011 X
Rev.0
Page 2 of 3
Template: MTExDOC101 Rev 5
Approve date :(2019/06/11)
This certification indicates compliance with R10.1 of the Mines Health and Safety Act and/or EMR 8(1) of the
Occupational Health and Safety Act, provided that the apparatus is used as prescribed in accordance with:
1) Any conditions set out in this Certificate;
2) This certificate only covers equipment imported between the “Issued” and “Expiry” dates;
3) When the supporting Q.A.N. (Quality Assurance Notification) of the equipment manufacturer expires,
it is the responsibility of the applicant (as mentioned above) to submit a valid Q.A.N to MTEx
Laboratories.
4) The test results presented in this Ex Test Report relate only to the item or product tested.
1. OVERVIEW
The intrinsically safe, multifunctional and rugged industrial smartphone IS530.1 has been designed
for use in explosion hazardous areas of zone 1 and 21. It provides numerous technologies like 4G
(LTE), NFC, GPS, Wi-Fi and Bluetooth LE. The IS530.1 with an Android operating system, large
internal memory, amplified loudspeaker, replaceable battery pack and functional 13-pin ISM
interface.
2. ELECTRICAL/ AND SAFETY PARAMETERS
Power Supply:
The smartphone may only be used with the approved, intrinsically safe battery pack BPIS530.1
made by i.safe MOBILE GmbH.
LiPo battery Uo = 3.8 V (Uo_max = 4.35V) / 3.6 Ah / 13.68 Wh
It is permissible to charge the battery pack alone outside the device via an approved charging
adapter.
Interfaces:
The device has a lateral magnetic charging port with which it can be charged outside hazardous
areas via an approved charging adapter.
The contacts are intrinsically safe for gas and dust.
Furthermore, the device has an USB interface (type C) for charging and data transmissions outside
hazardous areas. It is not permitted to pen the USB interface cover in hazardous areas.
The ISM interface of the IS530.1 can be used within hazardous areas with approved headsets,
Remote Speaker Microphones (RSM) and add-ons, marking the smartphone multifunctional
equipment for industrial applications. For ISM interface use, the i.safe MOBILE headset IS-HS1.1 or
approved, intrinsically safe accessories may be used, it must be securely closed by the cover
provided for this purpose.
3. REASON FOR REVIEW
ARP 0108: 2014 Requirement.
4. DOCUMENTATION PROVIDED
IECEx Quality Assessment Report (DE/EPS/QAR12.0003/05)
IECEx Certificate of Conformity (IECEx EPS 19.0014 X)