Quick Start User Manual

This Quick Start Guide provides general guidelines for installing and using Readiris™ Pro 12

and Readiris™ Corporate 12. For detailed instructions on the full range of functionalities of

Readiris™, see the complete User Guide on the Readiris™ CD-ROM.

Installation

Log on to your Mac operating system as administrator or make sure you have the necessary •

administration rights to install the software.

Connect your scanner to your Mac and install the drivers and/or software delivered with •

your scanner. Test your scanner. If you experience any problems, contact your scanner

manufacturer.

Insert the Readiris™ CD-ROM in the CD-ROM drive. Double-click the CD-ROM icon on the •

Desktop, then launch the installer. Follow the on-screen instructions.

How to run Readiris™

Click the • Readiris™ icon on the Dock to open Readiris™.

How to conﬁgure your scanner

Before you can use Readiris™, you must conﬁgure your scanner:

Click • Preferences on the Readiris™ menu.

Select you scanner from the list, then select the scanner options. • (A resolution of 300 dpi is

recommended.)

If you are using an Image Capture scanner, make sure you select the option • Enable Image

Capture Scanners.

Note: if the correct scanner driver isn’t installed, the scanner list will not be available.

How to use Readiris™

2 - Quick Start Guide

RIMac12-qug-intl.indd 1 29/07/09 14:14:05