Datasheet

6 - 40
Related Commands
An easier way of saving the current settings as default is enabling the option
"Save Settings on Exit" under the "Options" menu before the software is termi-
nated. These settings will be used at the next startup.
Settings are loaded into memory with the command "Open Settings" under the
"File" menu.
Exit
Closes the IRISPen software.
As the user quits, he also saves the current settings as default settings, pro-
vided that the option "Save Settings on Exit" under the "Options" menu is enabled.
If this is the case, these settings will be used at the next startup. The default
settings are saved in the file DEFAULT.IPC. When this file is erased, the factory
settings apply.
Settings files contain all operational parameters: the reading mode, the docu-
ment language, the target language for the translation (IRISPen Translator),
whether dot matrix reading mode (IRISPen Executive) and the mixed reading
mode with secondary bar code reading is enabled (IRISPen Executive), the out-
put target, whether the multiline reading mode is enabled (IRISPen Executive
and IRISPen Translator), the programming of pen button clicks and hotkeys,
table frame and character conversions, the output subset, alignment options (in-
cluding starting and ending codes), the bar code and handprinting settings (IRISPen
Executve), whether the speech synthesis (IRISPen Executive and IRISPen Trans-
lator) or system sound is enabled, whether the clipboard translation (IRISPen
Translator), the left-handed scanning and the image inversion are enabled.
Related Commands
The user can also quit the IRISPen application by right-clicking the IRISPen
control on the Windows taskbar and selecting the command "Exit", and by click-
ing the close button of the IRISPen application window.
7chapter6.p65 2/16/2001, 3:29 PM40