Datasheet

6 - 16
STATUS WINDOW
This window displays multiple system information useful to the user and pro-
vides direct access to the IRISPen application window.
The user can drag the status window to any appropriate position on the screen.
Besides the “basic” settings such as reading mode, language and output tar-
get, the status window will also tell you if bar code reading is enabled as second-
ary reading mode, if the dot matrix mode is enabled, if left-handed scanning is
used and if light text on a dark background is scanned.
For the IRISPen Translator, the status window lists the translation direction.
When English text is translated into French, "English-French" is mentioned in the
status window.
When the IRISPen is used to scan small graphics (by selecting the reading
mode "Black-and-White Bitmap to Clipboard" or "Greyscale Bitmap to Clipboard"
in the IRISPen application window), a blinking status window displays the mes-
sage "Image in Clipboard" to indicate that the graphic is in the Windows clip-
board, ready to be pasted in the target applications. (The user can paste the
graphic immediately, he does not have to wait until this message disappears.)
When the multiline scanning mode is used (by enabling the option "Multilines"
in the IRISPen application window, a blinking status window displays the mes-
sage "Press pen button to flush" for a few seconds after each scan. (The user
can rescan immediately, he does not have to wait until this message disappears.)
When the user scans too fast, a blinking status window asks him to scan
slower for a few seconds. (He can scan some 3.15" (8 cm.) per second.)
7chapter6.p65 2/16/2001, 3:29 PM16