User guide

CHAPTER 5 - FREQUENT COMMANDS

software and represented by the "~" symbol in the Scan Test

window.

The best to do if you encounter such a situation is to make the

software ignore the first and last position characters for the

output, otherwise you will have to delete them manually once

inserted in the active application.

• In the Output tab, select the options according to your needs:

Restore paragraph:

You must indicate how to interpret hyphens occurring at the end

of a line. If you scan the lines "The new presi-" and "dent waved

from the balcony", the hyphen must obviously be dropped so as

to recompose the word "president" in the output: "The new

president waved from the balcony".

Select this option in order to delete all the end hyphens occurring

in your text.

Note: If hyphens are deleted, the ending codes (see below) will

automatically be deleted so that the words can be properly

recomposed.

Add starting code:

You can have the IRISPen execute operations automatically in

the target application before the output result is being inserted.

You can for example have the software operate a carriage return

before it inserts any read line. A series of possible codes are

proposed by default, but you can also introduce your own

starting code.

To insert a starting code, select a code from the drop-down list or

select Custom to introduce our own code, then click OK to

confirm. With the Custom code, you can add any combination

of keyboard commands and/or characters.

The default starting code is: <None>.