Operation Manual

User Manual
2.4 GHz
Wireless Keyboard
1.0 Safety Instruction
Put the device always on a stable and straight surface. In
case of falling it can be damaged.
Don‘t place the device into direct sunlight or in places with
high temperature. This can damage the device or shorten
his average useful life.
Don‘t place it in the near of heat sources like radiators or
other heat producing devices.
Don‘t expose the devices to rain, water, wetness or high
humidity.
Don‘t place it in the bathroom or the kitchen in the near of
a sink.
Avoid the direct contact with water.
Don‘t try to open the device.
Prior to the rst use of our product make a backup of your
data.
We are not liable for any loss of data.
2.0 Introduction
The i.onik
®
Keyboard is a wireless keyboard with touchpad
perfect for use with Smart TV etc.
2.1 Specication
• Alpha-numeric keyboard with 80 keys and 14 multimedia
keys
• Touch area can be shifted to mouse or numeric keypad
mode
• 2.4 GHz FSK Auto-link technology (automatic connection
between USB receiver and keyboard)
• 67 two way RF channels
• Operation distance: 6-10 m
• Auto ON/OFF
• With USB Nano receiver
• Supports Windows 2000/ME/XP/Vista/7/8
• System Requirement: 1 USB-Port
2.2 Content
• 1x 2.4 GHz wireless keyboard with touchpad
• 1x USB Nano receiver
• 2x AAA alkaline batteries
• 1x manual
• 1x warranty card
3.0 Functions
3.1 Touchpad Functions
1. Default is numeric keypad function.
Moving by nger from left to right
to enter into mouse function mode;
moving from right to left side enter
into numeric keypad mode.
2. The mouse function list:
• Single nger move = the mouse cursor sliding action
• Single nger click = left button of mouse
• Double nger click = middle button of mouse
• Three nger click = right button of mouse
• Double nger leftward = page up
• Double nger rightward = page down
• Double nger up & down = scroll up & scroll down
3.2 Multimedia Hotkeys on the keyboard
FN+ESC = Media Player
FN+F2 = Previous track
FN+F4 = Volume down
FN+F6 = Mute
FN+F8 = www search
FN+F10 = Mail
FN+F12 = My Computer
4.0 Operation
4.1 Installing the Batteries
The keyboard uses two AAA alkaline batteries.
1. Remove the battery
compartment cover on
the bottom of the keyboard
by squeezing the cover in from
the tab to release it.
2. Insert the batteries as shown
inside the battery compartment.
3. Replace the cover.
4.2 Connecting the Receiver
Insert the receiver to a USB port immediate or by an extra
USB cable. The keyboard is now ready for use.
4.3 Restoring Factory Default Settings
If the wireless keyboard doesn‘t work, you can set the de-
vice back to factory default settings.
1. Check if the battery volume is normal. If the batteries are
used out, please replace them.
2. Press the keys of “Esc” and “K” at the same time.
3. Insert the USB receiver into the USB port of the PC or
notebook.
Note: Power saving design: When the keyboard doesn‘t
take any action about 5 seconds and gets into power save
function, press any key or touch the screen to wake the
keyboard.
We do not assume any liability for lost or destroyed data or for any other devices.
Keep away from children. Danger of choking on or swallowing small parts. All data without guaranty.
All trademarks, registered trademarks and logos are the property of their respective owners.
FN+F1 = Play/Pause
FN+F3 = Next track
FN+F5 = Volume up
FN+F7 = Web/Home
FN+F9 = www favorite
FN+F11 = Keys lock
FN+Einf = Calculator
5 6 7 8
According to the European WEEE directive, electrical
and electronic equipment must not be disposed with
consumer waste. Its components must be recycled or
disposed apart from each other. Otherwise conta-
minative and hazardous substances can pollute our
environment.
You as a consumer are committed by law to dispose electrical and
electronic devices to the producer, the dealer or public collecting
points at the end of the devices lifetime for free. Particulars are
regulated in national right. The symbol on the product, in the
user‘s manual or at the packaging alludes to these terms. With
this kind of waste seperation, application and waste disposal of
used devices you achieve an important share to environmental
protection.
Chips and More GmbH
Gewerbestr. 7 | 79112 Freiburg | Germany | www.i-onik.de
Service: + 49 7664 403 69 12
Email: [e-mail]