User's Manual

CHAPTER 1 - Getting Started
7
Power Supply
The computer can be powered using either the built in battery or the AC
Power Adapter plugged into any grounded AC power outlet.
Using the Battery
The primary source of power for the computer is a Lithium-Ion battery pack.
The battery pack will first need to be installed on the underside of the
computer. After following the battery installation instructions below, plug the
AC adapter into any electrical outlet and the computer will begin recharging
immediately. In the future, you should not have to access the battery pack
unless you wish to replace it with a fresh one.
Note:
1. The Battery LED lights green when charging and will turn off when the
battery is fully charged.
2. When charging the first time, it is recommended that the battery be
allowed to charge for no less than eight hours.
3. It will take a longer time to complete the charging process, if the user is
using the computer at the same time.
To install and remove the battery
pack:
Power down the computer using the
Power Switch.
Installing the Battery:
1. Correctly align the battery and the notches in the battery bay. Firmly
push the battery toward the computer until it clicks securely into place.
2. Turn the computer on using the power switch or begin recharging using
the AC Adapter cord.
Power
Switch