i-mate SPL ™ Quick Start Guide
SPL Quick Start Guide
Phone and items in the box i-mate ™
SPL Quick Start Guide 7 1 2 1 8 9 3 3 4 10 5 11 7 12 Image 1 Image 2
Overview of phone and buttons 1. Side keys image 2: “+” and “-“button Short press Side up/down key to turn up/down the volume Long press Side up key to start Quick list. Long press Side down key to enter Notes. Press to silence the ring of an incoming call. 2. Media Player keyimage 2: the musical symbol Press to start Windows Media Player Mobile 3. Left Soft Key and Right Soft Key Carry out the command displayed at the left/right corner at the bottom of the screen. 4.
SPL Quick Start Guide LED indicators The various colors that might display in the LED Indicator area are summarized here.
Step-by-step setup of phone Install and Charge battery The battery must be fully charged before you use your phone for the first time. The battery can be charged with the phone is turned on or turned off. Open the cover and remove the battery 1. Hold the phone with one hand and the device facing down, use your thumb to press the back cover of the phone and slide it open towards the bottom of the phone. 2. Remove the battery by lifting it up from the bottom end as shown in the illustration.
SPL Quick Start Guide SIM and miniSD card Insert the SIM card 1. Pull the SIM card tray out as shown in the illustration 2. Insert the SIM card onto the tray with its gold-plated contacts facing upwards. The cut-out edge of the SIM card should be placed to the top right of the SIM card tray. 3. Push the SIM card tray back into the device Inserting a miniSD card Use only mini Secure Digital (miniSD) cards in your SPL’s memory card slot.
Switching your phone on and off Turning on your phone The power button location is indicated in page 4. Press and hold the power button for several seconds to switch on and off your phone. Install ActiveSync If you use Outlook on your desktop or notebook PC, you can synchronize E-mail, contacts, calendar, and other data between your phone and your PC, keeping information up to date in both devices. Installing ActiveSync on your PC 1. Insert the Getting Started CD into the CD drive of your PC. 2.
SPL Quick Start Guide Web browsing Your i-mate™ SPL co m e s w i t h Microsoft® Internet Explorer Mobile built in, so you can view Web and WAP pages while you are on the move. To launch it, go to Start > Internet Explorer Alternatively, you can press the Explorer key on your keypad, indicated on page 4. You can go straight to a Favorite stored on your device, go to Menu > Favorites and select a web site. Alternatively you can visit a site by going to Menu > Address Bar and entering the web address.
In the middle of screen you will see the current image being seen by the camera. To capture the image, press the Left Soft Key labeled ‘Capture’ or press the Camera key on the side of the device. You will hear a shutter sound and the picture will be saved. Capturing a video You can start the Video Recorder function by going to Start > Camera and then press Menu > Mode > Video Press the ‘Capture’ menu option to start recording. Press the ‘Stop Capture’ key to stop.
SPL Quick Start Guide Previewing pictures To start the program, go to Start > Pictures and Videos After you enter Pictures and videos, it will show on screen the preview of all pictures stored on both your phone and memory card. • Click on any picture to zoom in on one picture. • On the preview screen, press navigation keys to preview previous/next picture in turn.
Securing your phone There are 3 ways to secure your i-mate™ SPL and we recommend you activate these to protect your device: SIM PIN Just like a standard mobile phone, you can activate a Personal Identity Number for your SIM card. This number must be entered each time the telephone is switched on. To Enable the SIM PIN From the Home Screen, go to Start > Settings > Security > Enable SIM PIN You will be asked to enter the current SIM PIN code.
SPL Quick Start Guide To Disable Go to Start > Settings > Security > Device Lock, enter your PIN and untick the box ‘Prompt if device unused for’ Lock/Unlock keypad You may lock the keypad to stop accidental pressing of the buttons. Press and hold the ‘Home’ key to lock. To unlock press the left soft key , followed by the ‘*’ key. Additional sources of information Your user manual gives a detailed guide through the capabilities of your device.
