User Manual i-Call 450 -Please read carefully before use.
1. Introduction 1.1Appearance 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.
2. Basic functions 2.1 Device Lock or unlock You can use the Lock key and the touch screen to prevent unexpected operations. 2.2 Informing panel The system status bar will display received text, reminder or activity information and so on. Use your finger to press the status bar on the top of the pull-down screen, you can open the informing panel to quickly boot or close the functions of WLAN, Bluetooth, Mobile network and so on. 2.
2.7.1 Choose text 1. Long press the wanted text bar until the choosing cursor shows up. 2. Move the cursor to the front of the wanted texts. When the finger leaves the screen, text selection menu boots up. 3. Click “choose the text”, drag the cursor to choose. 2.7.2 Copy and paste text 1. Choose the text, click Copy or Cut icon. 2. Move the cursor to where the texts are needed, click Paste. 2.8 Restore the factory setup Menu key→setup→backup and restore→ restore the factory setup.
the followings: Press the Volume key on the right side of the phone Press the Power key once. 4.2 Message 4.2.1 Send text message 1. Click message icon 2. Click message icon to write a new text 3. Input the receiver’s number, or choose the contact from the contact list. 4. Input the content into the message content frame, then send. 4.2.2 Send multi-media message In the Create Message page, click menu→add theme, click Attachment Icon to choose photo, video, audio and so on, click Send. 4.3 Email 4.3.
click Scan Bluetooth device 3. The phone will search and display the Bluetooth device list, click and match the wanted. 4.4.3 Receive and send data by Bluetooth 1. Open Bluetooth WLAN function, click the device name, set up the Bluetooth as Detectable. 2. When the screen displays the Bluetooth authorization request, click “Receive” 3. Open informing panel, click the Bluetooth transmission informing, click “Receive file” You can transmit music、recording、video、contact and so on, by Bluetooth WLAN. 4.
legal or healthy problems of the content. Any questions, please consult the service providers or communication operators. 5. Trouble shooting When operating the mobile phone, if problems occur, please refer to the solutions as follow. If problems still remain, please contact the salesman or service providers.
network not at the GSM service area signal weak cannot charge Please move to the area where the network service is served. please retry after moving to a strong-signal area the voltage is not matching with the charger please use the voltage consistent with the charger use non-standard charger Please use the special charger for this device Check the socket connection the bad contact Conditions of Guarantee 1.
7. In the case of TFT, there exists what are known as dead pixels or bright dots (due to the complexity of the manufacturing process), in such cases, there exists a maximum limit permitted by law (ISO 13406/02) that allows this not to be considered defective. 8. The power supplies or chargers and batteries will have a guarantee limited to six months as long as they used within the established operating conditions for the correct usage have not been exposed to power surges. 9.
