User's Manual

b. VGA Media Source

• Video - Connect the VGA cable from the media

source’s VGA output to the Transmitter’s VGA input.

• Audio - A 3.5mm stereo audio cable is required (not

included) to transmit audio when using this input.

Connect the 3.5mm stereo audio cable from the VGA

source component’s audio output to the Transmitter's

PC AUDIO-IN port.

c. Component Media Source

• Video – Connect the Component Video

output (YPbPr) from the source, into the

Component/Composite Adaptor (included). Connect

the Component/Composite Adaptor

to the PC-IN port on the Transmitter.

• Audio - A 3.5mm stereo audio cable is required (not

included) to transmit audio when using this input.

Connect the 3.5mm stereo audio cable from the VGA

source component’s audio output to the Transmitter's

PC AUDIO-IN port.

• Connect HDMI cable from the Transmitter’s pass-thru

output port to the input of the display device to enjoy

the video coming through HDMI1 only.

Before starting the installation, please ensure that all source components (Blu-ray player, cable box, etc.) and the display

equipment (TV, display, projector, etc.) are turned off.

For initial setup of your HD FLOW3 system complete steps A, B, C, D, E and F in order.

A) Connecting Source Components To The Transmitter

a. HDMI Media Source

• Note: It is recommended that HDMI1 input port be used if only one HDMI source component is present.

INSTALLATION AND OPERATION

• Connect HDMI cable from the source components

output to the Transmitter's HDMI1 or HDMI2 or

HDMI3 input port.