User's Manual

7
Receiver Front
1. Power/Link Indicator Light
• Blinking indicator light - Establishing
link between the Transmitter and
the Receiver.
• Solid indicator light - Link between
the Transmitter and Receiver has
been established and is ready for
signal transmission.
2. HDMI
• The HDMI indicator light will be
illuminated when the HDMI port
is selected for video output.
• If there is no signal, and/or the
cable is not connected, the indicator
light will blink.
3. IR Window
• IR receiving window enables
remote control o
f the transmitter
and/or source components.
4. Link/Output Selection Button
• When powered on: HDMI indicator lights blink.
• Press and hold for 8 seconds until
all indicator lights blink
synchronously, you are now in
Scan/Pairing Mode.
Receiver Back
1. HDMI-OUT
• HDMI output port
8. DC
• 12V DC Power Input
* For better IR reception range, use the IR input port with
IR extender (not included).
1
2
3
4
1
2
3