User's Manual

Operation Control & Function
English
9
Full HD Full HD Full HD Full HD Full HD
AUDIO-OUT 4
Connect additional IR Extender in order to extend receiving the
remote control.(purchase separately)
○
○
Press it shortly to turn the power on.
When power on,
-
-
Press shortly : Press to select the video input source. Each press the power
button will cycle through the available video input "HDMI
→
COMPO
→
AV
→
HDMI " in sequence.
Press longer : Press and hold more than 3 seconds to turn the power o.
■
■
Receiver Front
Receiver Rear
1
2
3
4
5
6
1
2
3
4
5
6
7
8
Description Function
AV-OUT
2
HDMI-OUT 1
HDMI output port
IR-IN 3
COMPONENT-OUT 5
Component output port
Stereo Audio output port
DC 8
Power input port
Composite or Scart output port
LAN
7
USB
6
This USB port is for software upgrade.
(For more information, please refer to Software upgrade on page 17. )
Power and
Source Button
Description Function
1
IR window
2
IR receiving window from remote control.
3
4
COMPO
5
HDMI
It will be on when the HDMI-OUT port is selected for the video output.
6
Power/Link LED
○
○
○
Blink : System booting or establishing link between the transmitter and the receiver.
Quick Blink : Software upgrading or wireless/LAN mode switching.
On : Finish of link establishment is completed between the transmitter and the
receiver.
AV
It will be on when the AV-OUT port (composite or SCART) is selected for the video
output.
It will be on when the COMPONENT-OUT port is selected for the video output.
LAN cable will be used for the following feature
○
○
○
Connection to PLC modem
Direct connection to LAN cable
Connection to PC for the system conguration setting