User's Manual
Installation
English
11
Full HD Full HD Full HD Full HD Full HD
1)
2)
3)
4)
5)
6)
7)
Connect the cable of the desired devices (multimedia player and display device) to the port of the
transmitter/ receiver and turn the power on.
Connect the power adapter, then the power will be turned on automatically.
During the boot time, LEDs on the front panel of transmitter and receiver blink .
After booting, Power/Link LED blinks until the link between the transmitter and the receiver is up.
In/output port setting of the transmitter and the receiver is controlled by remote control or button
setting on the product manually.
When all the process is completed, Power/Link LED activates without blinking, and the video will
appear on the screen 3~5 seconds later.
If wireless or cable link is aected by external factors, Power/Link LED may blink again.
(Please reconnect the cable and power)
* Note1 : It is recommended to connect HDMI cable to the transmitter and the receiver, before power on.
■
Transmitter / Receiver Installation
Transmitter Receiver
Adapter Adapter
Multimedia player / Display device