Wireless Full HD Sender English User’s manual www.i-trio.
English Wireless FULL HD Sender “I Wanna Cable Free Life!” The integration solution of wireless multi-media connections
Contents Caution for Safety Caution for Safety . . 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 English .
Caution for Safety Please read this user’s manual carefully before using the product. English If there is any strange sound, smoke or odor, pull the cable off immediately. (It may cause fire or electric shock) Do not disassemble. (It may cause fire or electric shock.) Do not put any sharpen object into the venting hole of the product. (It may cause fire or electric shock.) Ensure to plug the product firmly. (It may cause overheating or fire if it plugs unstably.) Ensure not to use the damaged cable.
Caution for Safety English Always wipe the product off with soft fabric, not water mop. (Water may come inside the product through the venting hole, and it may cause electric shock.) Keep clean the power plug and the outlet. (Dirt may cause a short circuit and fire.) Keep the product out of reach of children. Don’t unplug the power cord with a wet hand. (It may cause electric shock.) The heat and humidity may cause the damage to the remote control.
Introduction ■ Product Introduction English itrio, using WiFi wireless solution, is the device for sending 1920x1080 Full HD video sources to other location in your house. Once you connect Full HD video sources such as Set top box, Blu-ray player, Multi media player, DVD player or PC to the transmitter and connect the display device to the receiver, you can enjoy wirelessly Full HD video anywhere in your house. itrio uses IEEE802.11n draft 2.0 standard WiFi technology for wireless connection.
Package Contents ※ Before you use the product, check the following components are all present.
Operation Control & Function ■ Transmitter Front Description Function ○ English 1 Power/Link LED ○ ○ 1 Blink : System booting or establishing link between the transmitter and the receiver. Quick Blink : Software upgrading or wireless/LAN mode switching. On : Finish of link establishment is completed between the transmitter and the receiver. 2 HDMI1 It will be on when the HDMI1 port is selected for the video input.
Operation Control & Function ■ Receiver Front Description Function ○ ○ 1 Power/Link LED 2 HDMI It will be on when the HDMI-OUT port is selected for the video output. 3 COMPO It will be on when the COMPONENT-OUT port is selected for the video output. 2 4 AV It will be on when the AV-OUT port (composite or SCART) is selected for the video output. 3 5 IR window IR receiving window from remote control.
Operation Control & Function ■ Remote control 1 2 English 4 5 3 6 8 7 Function Description To turn on/off the power of transmitter and receiver. Power on : ○ 1 - If you turn on TX or RX when power/Link LED is on , both devices will be power-on simultaneously within 10 seconds. - You have to turn on each of TX and RX separately when power/Link LED is off, it may takes around 1 min 30 seconds for booting up.
Installation ■ Transmitter / Receiver Installation Transmitter Receiver English Multimedia player / Display device Adapter Adapter 1) Connect the cable of the desired devices (multimedia player and display device) to the port of the transmitter/ receiver and turn the power on. 2) Connect the power adapter, then the power will be turned on automatically. 3) During the boot time, LEDs on the front panel of transmitter and receiver blink .
Installation How to make link between the transmitter and the receiver. Transmitter Receiver English HDMI1/HDMI2 input & Appropriate output port * Composite(AV) supports only 1080i/576i/480i resolution. Composite(AV) input & Appropriate output port PC(D-Sub) input & Appropriate output port Component(D-Sub) input & Appropriate output port Component (Multimedia Device) * Composite(AV) supports only 1080i/576i/480i resolution.
Installation ■ IR Flasher Installation Transmitter Receiver English Multimedia player IR Flasher From the receiver, you can remotely control the multimedia player which is connected to the transmitter. 1) Connect IR Flasher to IR-IN of the transmitter. 2) Place the end point of IR Flasher to near IR window of multimedia players. 3) Control multimedia player remotely by pointing remote control of multimedia player to IR window of the receiver.
Installation ■ LAN Installtion Transmitter Receiver English LAN Hub LAN Cable Adapter Adapter 1) Connect LAN cable directly between the transmitter and the receiver, or to the IP router/LAN hub. 2) When you connect the transmitter and the receiver directly by UTP LAN cable, input the both end of LAN cable to the each LAN port of the product. Then, turn the power on. 3) When you connect to the IP router/L2 switching hub, please follow the process below. a. Please check the IP address of the device.
Installation ■ PLC Installation Transmitter Receiver English PLC modem PLC modem 1) Connect the LAN cable of the PLC modem1 to the LAN port of the transmitter. 2) Connect the Power cord of the PLC modem1 to the DC Power of the transmitter. 3) Connect LAN cable of PLC modem2 to LAN port on the back of the receiver. 4) Connect the Power output of the PLC modem2 to the DC Power of the receiver. *Please refer to the detailed PLC modem guide which is provided with HD-P100 model.
Product Specification ■ Video Format Supported Video Standard DTV Format (TV standard) 640 x 480p60 640 x 480p70 640 x 480p85 800 x 600p60 800 x 600p70 800 x 600p85 1024 x 768p60 1024 x 768p70 1024 x 768p85 1152 x 864p60 1152 x 864p70 1152 x 864p85 1280 x 800p60 1280 x 960p60 1280 x 960p70 1280 x 960p85 1280 x 1024p60 1360 x 768p60 1440 x 900p60 1600 x 1200Rp60 1600 x 900p60 1680 x 1050p60 720 x 480I60(NTSC) 720 x 576I50(PAL) 720 x 480p60 720 x 576p50 1280 x 720p50 1280 x 720p60 1920 x 1080i50 1920 x 108
Product Specification ■ Audio Format Supported 1) Digital Audio - Digital compressed audio : AC-3 Dolby Digital, DTS ( Pass Through) English 2) Analog audio - 16bit 2-channel linear PCM (44.1kHz & 48kHz) ■ Change WiFi Frequency 1) If there are the devices that use same WiFi frequency, the receiver’s output video may be distorted because of frequency interference. In this case, you can change WiFi frequency in order to avoid interference.
Product Specification ■ Software upgrade 1) Download up-to-dated software (itrio.img) at web page (www.i-trio.com) English 2) Store this S/W in "root directory" of USB memory. 3) Plug USB memory into the USB port of the receiver. 4) With LEDs blinking, the receiver and the transmitter will be upgraded in sequence. (It takes around 5 minutes) 5) When the refreshing is completed, the product will be rebooted. Important Notice) a.
Q&A ■ Q&A English 1) Q : Power/Link LED keeps blinking and the transmitter and receiver are not linked appropriately. A : Communication method (LAN/WiFi) or channel may not be set appropriately. Please set the desired communication method and channel by referring 4-5). ⑥~⑧. Especially, when the system is wireless mode, make the transmitter and the receiver closer, please check if the link is completed pressing Ch1 and ch2 for over 5 seconds and, then, make them locate near TV.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
IMPORTANT Safety Instruction: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this equipment near water. 6) Do not using near any heat sources such as radiators, heat resisters, stove, or other equipment that produce heat.
European Union Regulatory Notice Compliance with these directives implies conformity to harmonized European standards (European Norms) that are listed in the EU Declaration of Conformity issued by HP for this product or product family. This compliance is indicated by the following conformity marking placed on the product.
