User manual
Table Of Contents
- Front page
- Warnings/Approvals
- Addresses
- Preface
- Table of Contents
- 1. Introduction to the ida 812-1x MIO
- 2. Installing the ida 812-1x MIO Interface
- 3. Installing the ida 812-1x MIO Printer
- 4. ida 812-1x MIO Operation
- 5. Front Panel Setup
- 6. Errors and Recovery
- 7. Function Selection via the Line
- 8. FSL Setup via PC's parallel port
- 9. Font Selection
- 10. Test Settings Printout
- List of Abbreviations
- APPENDIX A - FSL Functions
- Appendix B. DIP Switch Settings
- Index
- READER'S COMMENTS
ida 812-1x MIO Operator’s Guide
Introduction
-7-
1.
Introduction to the ida 812-1x MIO
1.1. What is the ida 812-1x MIO
The ida 812-1x MIO is a printer with an interface de signed for use
with the DisplayWrite/36, Office/38, Office/400, TMS and similar
programs.
The ida 812-1x MIO emulates the IBM 5219/3812-1 printers and
supports the facilities offered by the IBM 5219 printer. Furthermore,
simple emulations of the IBM 5224-1, IBM 5225-2, IBM 5256-120
and IBM 4234-2 are possible.
Front Panel Support
For the following printers, the ida 812-1x MIO can be set up via the
front panel:
• HP LaserJet IIISi
• HP LaserJet 4
• HP LaserJet 4Si
• HP LaserJet 4 Plus
• HP LaserJet 4V
• HP LaserJet 5
• HP LaserJet 5Si
• HP Color LaserJet
For further details please see Chapter 5.
Flash Prom Support
The ida 812-1x MIO supports downloading of new firmware from
twinax or from shareport. For further details please see Section 8.1.
1.2. ida 812-1x MIO Features
The ida 812-1x MIO printer gives you the following fea tures:
• Front panel support for HP LaserJet IIISi, 4, 4Si, 4 Plus, 4V,
5, 5Siand HP Color LaserJet
• Flash prom for downloading of new firmware