User manual
Table Of Contents
- Front page
- Warnings/Approvals
- Addresses
- Preface
- Table of Contents
- 1. Introduction to the ida 812-1x MIO
- 2. Installing the ida 812-1x MIO Interface
- 3. Installing the ida 812-1x MIO Printer
- 4. ida 812-1x MIO Operation
- 5. Front Panel Setup
- 6. Errors and Recovery
- 7. Function Selection via the Line
- 8. FSL Setup via PC's parallel port
- 9. Font Selection
- 10. Test Settings Printout
- List of Abbreviations
- APPENDIX A - FSL Functions
- Appendix B. DIP Switch Settings
- Index
- READER'S COMMENTS
ida 812-1x MIO Operator’s Guide
Appendix A - FSL Functions
-47-
No. Name Syntax Parameters
19
Duplex Printing
%Y19,<n1>%
*0 = Simplex
1 = Long-edge
duplex
2 = Short-edge
duplex
21
Horizontal
Compression
Extended
(Vertical
Linefeed Com-
pression)
%Y21,<n1>[,n2]%
%Y21,<n1>[,n2,n3]%
n1
0 = Compression
*1 = No compression
n2
1 = Tractor (Upper)
2 = Drawer 1 (Upper)
3 = Drawer 2 (Lower)
4 = Manual feeder
5 = Envelope feeder
6 = Drawer 3 (Lower)
n3
1 to 255
(expressed in 1/100)
*100
22
Printer Driver
Selection
%Y22,<n1>%
2 = HP PCL 4
*4 = HP PCL 5
37
IBM Printer
Emulation
Select
%Y37,<n1>%
n1 Emulation
*3812
5224
5225
5256
4234
4245
*IPDS
+IPDS
Only with IPDS
support
n2 Secondary Address
0-6
48
Permanent ESC
Character
Selection
%Y48,<'char.'>%
or
%Y48,<xx>%
'char.'
= character selected
from the current
IBM character
table
xx
= HEX value of the
character selected
from the table
*00
51
User-Defined
String(s) at
Power-Up
%Y51,<n1>%
0-99 = One or more
strings
defined in
FSL 61
(max. 8)