User manual
Table Of Contents
- Front page
- Warnings/Approvals
- Addresses
- Preface
- Table of Contents
- 1. Introduction to the ida 812-1x MIO
- 2. Installing the ida 812-1x MIO Interface
- 3. Installing the ida 812-1x MIO Printer
- 4. ida 812-1x MIO Operation
- 5. Front Panel Setup
- 6. Errors and Recovery
- 7. Function Selection via the Line
- 8. FSL Setup via PC's parallel port
- 9. Font Selection
- 10. Test Settings Printout
- List of Abbreviations
- APPENDIX A - FSL Functions
- Appendix B. DIP Switch Settings
- Index
- READER'S COMMENTS
ida 812-1x MIO Operator’s Guide
Front Panel Seup
-29-
PAPER SIZE
"SIZE=" defines the size/type of paper in the present tray
and the extents and margins that will be reported back to the
host system. Possible values are:
"LETTER"
"LEGAL"
"A4"
"EXECUTIVE"
“LEDGER”
“A3” (HP LaserJet 4V only)
"MONARCH"
"COM10"
"DL"
"C5"
"B5"
5.2.4. SETUP Menu
This menu is only available in IPDS mode
4
.
5.2.5. SAVE/RESTORE Menu
SAVE SETTINGS
"SAVE SETT." has the same effect as the FSL function X1. This
function saves current non-IPDS (FSL) settings in the non-volatile
memory.
Possible value selections are "NO" and "YES".
Default selection is "NO".
RESTORE
This menu has the following options:
All RESTORE options have "NO" as default.
RESTORE=SET. has the same effect as the FSL function
X4. This function restores last saved
non-IPDS settings into current settings.
RESTORE=DEF. has the same effect as the FSL function
X3 and. It restores the factory default non-
IPDS into current settings.
4
Contact your i-data distributor for further details.