Installation Guide

7
Route the VAC and Impact Sensor cables through the grommet, and
then fit the grommet snugly into the center hole.
085-00000590_01
6
Route the VAC cable (with 10-pin connector) and Impact Sensor
cable (with 8-pin connector) up through the center hole.
Feed the VAC and Impact Sensor cables through the VAC bracket.
Attach the bracket to the vehicle using the supplied bolts and nuts.
Skip to Step 10.
8
M6 X 1.0 X 25 mm
Socket Head Screw
M6
Nylon Lock Nut
Use supplied hardware:
Topside of Vehicle Mounting Surface
Underside of Vehicle Mounting Surface
M6
ID Washer
M6
ID Washer
Vehic
VAC4 InstallationPowerBox
TM
VAC Cable
(10-pin)
Impact Sensor Cable
(8-pin)
D
D
D
Feed the VAC and Impact Sensor cables through the VAC bracket.
Attach the bracket to the vehicle using the supplied bolts and nuts.
Skip to Step 10.
Skip to Step 10.
D
R
Feed the VAC and Impact Sensor cables through the VAC bracket.
Feed the VAC and Impact Sensor cables through the VAC bracket.
Attach the bracket to the vehicle using the supplied bolts and nuts.
Attach the bracket to the vehicle using the supplied bolts and nuts.
R
R
R
A
A
A
then fit the grommet snugly into the center hole.
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
F
Route the VAC and Impact Sensor cables through the grommet, and
Route the VAC and Impact Sensor cables through the grommet, and
then fit the grommet snugly into the center hole.
then fit the grommet snugly into the center hole.
F
F
T
T
T
T
VAC Cable
VAC Cable
(10-pin)
(10-pin)
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T