User's Manual

UTP 1.0 Installation & Verification Instructions

I.D. Systems Confidential and Proprietary

055-00000889 Rev A

4. Installation Steps

NOTE: In all cases, safe location and secure mounting of the UTP 1.0 device is the

installer’s primary concern.

Installer is responsible for ensuring the UTP 1.0 device is safely and securely

mounted and does not interfere with vehicle operation.

1) Locate the vehicle’s OBD-II port (usually located on the bottom left of the driver’s side

dash).

• Depending on the vehicle make/model, sometimes the OBD-II port is located in the

bottom middle or bottom right of the driver’s side, under the dash area.

• With Kia and Hyundai vehicles, the OBD-II port is usually located on the front left

side of dash through a small access panel.

Example Location of OBD Port (varies by vehicle model)

2) Turn the engine on and roll down the driver’s side window, leaving the car door open

prior to installation.