User's Manual

UTP 1.0 Installation & Verification Instructions
I.D. Systems Confidential and Proprietary
14
055-00000889 Rev A
2) Move the OBD-II connector latch to the open position and unplug the OBD-II connector
from the vehicle OBD-II port.
3) Coil the UTP 1.0 cable, securing it to the enclosure, and fasten the OBD-II connector onto
the receptacle on the enclosure. Move the latch to the closed position.
4) Stack UTP 1.0 devices (as pictured below).
Coil the cable, securing it to the enclosure
Fasten OBDII connector to enclosure