User's Guide
Table Of Contents
- COVER
- COPYRIGHT
- 1. INTRODUCTION
- 2. SAFETY PRECAUTIONS
- 3. OPERATING PRECAUTIONS
- 4. PREPARATION
- 5. IDENTIFYING MODEL TYPE
- 6. EACH PART OF PRINTER
- 7. LED INDICATION OF PRINTER
- 8. INSTALLING BATTERY PACK
- 9. LOADING THERMAL PAPER
- 10. TEST PRINT
- 11. FUNCTION SETTINGS
- 12. CONNECTING TO HOST DEVICE
- 13. INSTALLING BELT CLIP / SHOULDER STRAP
- 14. CHARGING BATTERY PACK
- 15. CHARGING BY CRADLE
- 16. CHARGING BY CAR CHARGER
- 17. CHARGING BY BATTERY CHARGER
- 18. PRINTER MAINTENANCE
- 19. TROUBLESHOOTING
- 20. SPECIFICATIONS
- 21. ACCESSORIES AND CONSUMABLE PARTS
- 22. MS SETTINGS LIST
- REAR COVER
40
(5) Install the battery pack in the printer.
Figure 13-3 Belt Clip Installation (3)
(6) Rotate the belt clip 180 degrees.
Figure 13-4 Belt Clip Installation (4)
NOTE
◆
When using the belt clip, be sure to install the battery pack in the printer because the
belt clip comes off easily from the printer and the printer drops. Dropped printer may
cause personal injury or malfunction.
◆
Avoid the direct skin contact with the battery pack while using the belt clip. Prolonged
skin contact may cause low-temperature burns.