User's Guide
Table Of Contents
- COVER
- COPYRIGHT
- 1. INTRODUCTION
- 2. SAFETY PRECAUTIONS
- 3. OPERATING PRECAUTIONS
- 4. PREPARATION
- 5. IDENTIFYING MODEL TYPE
- 6. EACH PART OF PRINTER
- 7. LED INDICATION OF PRINTER
- 8. INSTALLING BATTERY PACK
- 9. LOADING THERMAL PAPER
- 10. TEST PRINT
- 11. FUNCTION SETTINGS
- 12. CONNECTING TO HOST DEVICE
- 13. INSTALLING BELT CLIP / SHOULDER STRAP
- 14. CHARGING BATTERY PACK
- 15. CHARGING BY CRADLE
- 16. CHARGING BY CAR CHARGER
- 17. CHARGING BY BATTERY CHARGER
- 18. PRINTER MAINTENANCE
- 19. TROUBLESHOOTING
- 20. SPECIFICATIONS
- 21. ACCESSORIES AND CONSUMABLE PARTS
- 22. MS SETTINGS LIST
- REAR COVER
26
Thermal Paper Shape
Always use the specified thermal paper. See "21 ACCESSORIES AND CONSUMABLE PARTS" for
details.
NOTE
◆
Use the thermal paper whose maximum diameter is 51 mm or less.
◆
Use the thermal paper whose maximum width is equal or less than 80 mm +0.5 mm
including winding deviation.
◆
DO NOT use the thermal paper whose end is glued or taped.
◆
Use the thermal paper whose core inside diameter is 8 mm or more.
NOTE
◆
DO NOT use deformed thermal paper. Doing so may cause the printer damaged.
NOTE
◆
In the case of using loosened thermal paper roll, rewind the roll before using it.
CORRECT
INCORRECT INCORRECT
CORRECT INCORRECT