User Manual

IGNITION ELECTRODE:

THE IGNITION ELECTRODE IS POSITIONED AS SHOWN, WITH THE HORIZONTAL PART OF

THE ELECTRODE FLUSH WITH THE DIFFUSER PLATE, LEAVING A GAP OF 1/16" TO 1/8"

WIDE. THE POINTING DIRECTION OF THE ELECTRODE IS AS SHOWN, BUT IS NOT

CRITICAL.

FLAME SENSOR:

THE FLAME SENSOR SHOWN IS A RECTIFICATION- OR FLAME ROD. A UV SCANNER CAN

BE USED INSTEAD. IN THAT CASE THE SCANNER TUBE IS POSITIONED IN THE SAME

HOLDER AS THE FLAME ROD.

1/4"

3 5/8"

1/16" - 1/8"

POSITION OF THE IGNITION ELECTRODE FOR STRAIGHT GAS BURNERS, USING A FLAT DIFFUSER PLATE.

JOB NO.

DRW. NO.SCALE

REVDATECHK. BY

ISSUED BYDRAWN BY

TITLE

Rev By Revision Description Date

POSITIONING OF THE IGNITION ELECTRODE FOR STRAIGHT

GAS BURNER, USING A FLAT DIFFUSER PLATE.

GIDM

SERIES

JULY 13/98

1:1 FIG. VI