i-box Podium Portable Bluetooth Speaker with Wireless Charging
The i-box Podium is a Bluetooth speaker designed around your phone. Not only does it play music for up to 18 hours, it also has a built-in wireless charger to keep your phone powered up The Podium also works as a handy phone stand - great for watching movies, looking at recipes, making video calls and much more.
心 • ) Ca『ingfo『your Speaker Important Safety Information Important - Please read these instructions fully before installing or operating your speaker. Keep away from flame sources such as lighted candles. Do not expose to dripping or splashed fluids. Objects filled with liquids, such as vases, should not be placed close to the speaker. The unit should not be exposed to direct sunlight, very high or low temperature, moisture, vibrations, strong magnetic fields, high frequencies and dusty environments.
Contents 5 2. Getting to know your speaker/charger Controls & features 23 1. Safety information Introduction Safety information 3. Getting started Charging your speaker Bluetooth connection Bluetooth play operation AUX IN connection AUX IN operation Wireless charging Wireless charging problems 6667777 4.
Box Contents 1x i-box Podium speaker, 1x 1mMicroUSB charging cable & 1x 50cm AUX IN cable Getting to know your speake『/cha『ger Before you get started please read the safety information on pages 2-3. ， Top - Control Panel O 顷 Buttons 1. <.!>Power On/Off 2. HIPlay/Pause 3. - Reduce volume/ Previous track 4. + Increase volume/ Next t『ack =c{}o Front-Wi『eless Charging Panel & LEDs Features 5. Phone stand 6. Wireless charging LED 7. Power/Mode LED 8.
Charging you『Podium speake『 Your Podium speaker has a built-in non user-replaceable Lithium battery. For best results, the first time you use the Podium, let it charge for 4-5 hours until fully charged. 1. Connect the micro USB cable supplied to the Podium's Micro USB socket (10) and to a powered USB port on a USB charger or computer 2. The Power/Mode LED (7) will be lit a constant Green while the battery is charging and will also flash Blue and Red while in Bluetooth pairing mode.
AUX IN connection and operation For audio sources without Bluetooth capability you can connect via the 3.5mm AUX IN socket (9) on the back of the Podium. 1. Use the 3.5mm audio lead supplied to connect an audio source to the AUX IN socket (9). On connection you will hear an audio message, "AUX mode" and the Power/Mode LED (7) will be lit a constant Red.
Specifications Power Input sv�1A sv�2A (Optimal SW) sv�3A 9V�2A (Optimal 10W) Lithium Battery Output: 4,000mAh Speaker Output: 2 x 3W RMS Wireless Charging Output: up to 10W (with 9VDC USB charger connected) Music Playback: Up to 18hrs Disclaimer Updates to Firmware and/or hardware components are made regularly. Therefore some of the instructions, specifications and pictures in this documentation may differ slightly from your particular situation.
FCC part 18 RF Radiation Exposure Statement: The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.During the operation of device a distance of 15cm surrounding the device and 20 cm above the top surface of the device must be respected. This device complies with Part 18 of the FCC Rules.
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
