NEXT Type No. L22C0E080 Model.
U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
DECLARATION OF CONFORMITY WE HYUNDAI IT CORP.
W220S Multi Function 2D/3D Wide Monitor Contents 1. Introduction ...................................1/27 2. Safety Information ........................1/27 3. Cautions for Health & Safety .........3/27 4. Handling Instructions .....................5/27 5. 3D Monitor SettingGuide...............5/27 6. Q&A for 3D Mode............................6/27 7. 3D Mode Specification ...................8/27 8. Installing the monitor ...................9/27 9. Adjusting the picture ..................17/27 10.
W220S Multi Function 2D/3D Wide Monitor 1. Introduction This manual contains instructions for installing and operating HYUNDAI IT CORP. W220S. HYUNDAI IT CORP. W220S is a highly ergonomic color display unit. • 22” viewable WSXGA+ LCD • High quality screen re-scaling capability • 100-240V AC input voltage • VESA DPMS (Display Power Management Signaling) • VESA DDC1/2B compatibility • Advanced digital On-Screen-Display controls • Digital Signal Input by DVI-1.
W220S Multi Function 2D/3D Wide Monitor Avoid operating the monitor in extreme heat, humidity or areas affected by dust. Temperature : 5~40°C Humidity : 30~80RH Be sure to turn the monitor off before plugging the power cord into the socket. Make sure that the power cord and the other cords are securely and rightly connected. Overloaded AC outlets and extension cords are dangerous, as are frayed power cords and broken plugs, which may cause electric shock or fire.
W220S Multi Function 2D/3D Wide Monitor - Cleaning and Maintenance • • • • • 3. Cautions for Health & Safety (Before use) - Warning • • • • To avoid to risk of electric shock, do not disassemble the Cabinet of display Unit. The Cabinet is not user-serviceable. Remember to unplug the display unit from the power outlet before cleaning. Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not use thinner or benzene, abrasive cleaners or compressed air.
W220S Multi Function 2D/3D Wide Monitor • If you feel any problems as follows, stop using it and take a rest. - Pain in the eyes, tears, dry eyes, heavy eyelids - Nausea, vomiting, dizziness, stomach pain, perspiration - Headache, heaviness in head or dizziness, dry mouth - Sickness ! If you don't feel better, go to your doctor. - Caution • • Intoxicated and/or medicated persons should not use this product.
W220S Multi Function 2D/3D Wide Monitor 4. Handling Instructions • When viewing stereoscopic images, please use the special polarized glasses. Without this glasses, you can not enjoy stereoscopic images. If you use some polarized glasses from other companies, you can not fully enjoy the stereoscopic images. Do no use the polarized glasses for other uses other than 3D viewing. Do not touch the surface of the monitor screen with bare hands.
W220S Multi Function 2D/3D Wide Monitor • • 6. Q&A for 3D Mode For 3D viewing, go to 1:1 mode under Display Control of OSD MENU before viewing it (Monitor Manual: see 21 page). Viewing on a different mode may decrease 3D effects. On 1:1 mode, the screen size changes according to the input resolution. It doesn't mean that it has some problems with it. It just operates 1:1 mode without scaling the input signal. 1. There is something like oil stain on the monitor screen.
W220S Multi Function 2D/3D Wide Monitor When you don't set the resolution properly. - 3D mode displays best in 1680*1050/60Hz resolution. (See 3D Monitor Setting Guide above ) When the left/right images are reversed - Change the option to have the image on the right displayed in the horizontal line of the odd number. - Read 3D S/W User's Manual enclosed.
W220S Multi Function 2D/3D Wide Monitor The monitor screen reflects my face. - This monitor has a 3D filter on the surface of the panel. The reflection is caused by it. You cannot remove it. To reduce the reflected lights, it is recommended that you don't have any light source behind your back. 3D screen displays dimly - This product has a 3D filter on the LCD surface to increase 3D stereoscopic effects. That makes it reduce brightness. Polarized glasses can reduce its brightness as well. 7.
W220S Multi Function 2D/3D Wide Monitor 8. Installing the monitor The following items should be found in the packaging. - Packing List Power Cord UK Japan America/Canada Europe South Africa Australia Signal Cable DVI Cable Audio Cable Manual & 3D Soft Program ! 3D Glasses Korea Above power cord can be changed upon different voltage areas. Please contact your dealer if anything is missing or damaged.
W220S Multi Function 2D/3D Wide Monitor - Selecting a suitable location • • • • • - Connecting the PC • 15 pin D-sub / DVI-D / HDMI ! 1. 2. 3. 4. Place the monitor at least 30cm from other electrical or heat-emitting equipment and allow at least 10cm on each side for ventilation. Place the monitor in a position where no light shines directly onto or is reflected on the screen. To reduce eye strain, avoid installing the display unit against a bright background such as a window.
W220S Multi Function 2D/3D Wide Monitor • Way to Connect 5. Turn on the power to the computer. The picture will appear within about 10 seconds. Adjust the picture to obtain optimum picture quality. See section Adjusting the picture in this guide for more information.
W220S Multi Function 2D/3D Wide Monitor • Audio system This monitor has an audio system including two micro loudspeakers. Each of two micro loudspeakers has an 3W(max.) output power. This system also supports a Audio output jack. ! This system has been tuned to get a best tone quality which an audio input level is under 500mv rms. If the input level is more than 500mv rms, you must tune down the audio input as the audio output tone may be distorted.
W220S Multi Function 2D/3D Wide Monitor - Setting the refresh rate Follow the instructions below to set your refresh rate in Windows 98/ME/XP/2000/VISTA. 1. 2. 3. 4. 5. 6. Go to the configuration window(Start-Settings-Configuration window). Double click on the ‘Display’ icon. Click on the ‘Settings’ tab. Click on the ‘Advanced’ button. Click on ‘Adapter’ and select 60Hz from the list. Click on ‘Apply’ to accept the selected value.
W220S Multi Function 2D/3D Wide Monitor • Preset Timing Table If the signal from the system doesn't equal to the preset timing mode, adjust the mode with reference to the user guide of videocard because the screen may not be displayed. ! No. Resolution H-Freq.(Khz) V-Freq.
W220S Multi Function 2D/3D Wide Monitor - User’s Environment Recommended Ergonomic User’s Environment • Viewing angle of the monitor should be between -5 ~ 15 degree. Supports Pivot. (Option) The screen can be vertically rotated by 90 degrees. This reduces the inconvenience of having to drag scrollbars and roll mouse wheels when working with documents or surfing the web.
W220S Multi Function 2D/3D Wide Monitor • Kensington Security (Locking) Slot • • This display unit supports a Kensington-type security device to secure your monitor. Kensington lock is not included. To purchase and install the Kensington locking device, please refer to the following contact information. * Kensington Technology Group · Address : 2000 Alameda de las Pulgas 2F san mateo, California 94403-1289 · Tel : +1 650 572 2700 · Fax : +1 650 572 9675 · Web-site : www.kensington.
W220S Multi Function 2D/3D Wide Monitor 9. Adjusting the picture You can adjust the screen display by using the buttons located below the screen. The second Menu from the OSD can't be chosen in digital-mode.
W220S Multi Function 2D/3D Wide Monitor - Using the On Screen Display To make adjustments in the On Screen Display, follow these steps: 1. 2. 3. 4. 5. 6. Push the MENU button to call the OSD to the screen. Push the or button to choose the item you want to adjust. The selected item is highlighted. Push the SELECT button to adjust the highlighted item. Use the or button to adjust the selection. Push the MENU button to return to the previous menu if you are in a submenu.
W220S Multi Function 2D/3D Wide Monitor - OSD Adjustments PC MODE • Picture BRIGHTNESS To adjust the brightness of the screen. CONTRAST To adjust the contrast of the screen. H.POSITION To move image left and right. V.POSITION To move image up and down CLOCK To adjust the horizontal size of the entire screen image. PHASE To adjust the noise of the screen image. AUTO ADJUST You can adjust the shape of the screen automatically into the full screen pattern.
W220S Multi Function 2D/3D Wide Monitor • Color PC ANALOG, DVI STANDARD For general Color tone. REDISH For Redish color with warm tone. BLUISH For Bluish color with cool tone. USER For adjusting degree of RGB as User wants AUTO COLOR (ANALOG ONLY) TO adjust the horizontal size of the entire screen image. HDMI MODE USER User can adjust directly settings of a screen menu. STANDARD For general Color tone. DYNAMIC To be Sharper image. MILD To be Smoother image.
W220S Multi Function 2D/3D Wide Monitor • Sound VOLUME To adjust the audio volume level. BASE To emphasize low frequency audio. TREBLE To empahsize high frequency audio. BALANCE To use this function to balance sound from the left and right speakers. MUTE Audio ON or OFF • Miscellaneous OSD CONFIGURATION - OSD TIMER To adjust OSD Display time on the screen. - OSD POS To adjust OSD Display position on the screen. - TRANSPARENT To adjust the transparency of OSD window.
W220S Multi Function 2D/3D Wide Monitor DISPLAY CONTROL If you choose DISP. CONTROL on the OSD menu, you can adjust the following - Full (16:10) : Shows full screen regardless of screen size. - Aspect : It keeps the vertical & horizontal ratio on the screen and shows with full screen. - 1:1 : Displays image according to actual input pixels. - RTC : Implemented only into DVI mode and FULL(16:10) mode RTC ON or OFF - Full (16:10) : Shows full screen regardless of screen size.
W220S Multi Function 2D/3D Wide Monitor 10. Display power management If the power management function of your computer is enabled, your monitor turns on and off automatically. You can control power management features from your computer. Your computer may have power management features which enable the computer or monitor to enter a power saving mode when the system is idle. You can reactivate the system by pressing any key or moving the mouse.
W220S Multi Function 2D/3D Wide Monitor 11. Troubleshooting If your monitor is not functioning properly, you may be able to solve the problem by following the suggestions below : Problem Blank screen Possible solution If the power LED is not lit, push the Soft power switch or check the AC cord to turn the monitor on. If the display unit is powered through the computer, check that the computer is switched on. The display unit might be in standby mode. Push one of the keyboard keys.
W220S Multi Function 2D/3D Wide Monitor Problem Possible solution Color defects Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. Try another color temperature. Size, position, shape or quality unsatisfactory Adjust the picture characteristics as described in the section OSD Adjustment. Duplicated images A problem with your graphics adapter or display unit. Contact your service representative.
W220S Multi Function 2D/3D Wide Monitor Problem The power LED is a orange color Possible solution LED Indicator can be orange color on changing of video mode or Input Signal. Check the Resolution and the frequency on the video part of your computer. Compare these values with the data in the Preset Timing Table. - Contacting service If the above troubleshooting hints do not help you find a solution to the problem, contact an authorized service agent.
W220S Multi Function 2D/3D Wide Monitor 12. Specifications LCD Display area Number of color Input signals Frequency rate Maximum bandwidth Maximum resolution Recommanded resolution Input voltage Power consumption Power management Plug & Play OSD menu Audio system VESA FPMPMI Ergonomics, Safety and EMC Operating Temperature Weight Dimensions (W X H X D mm) 22" viewable, Diagonal, Pixel pitch 0.282mm, A-si TFT 473.7(H) X 296(V), 22" Diagonal 16.7 million colors ( true 8-bit color ) R.G.
