USA AVC Tech 777 Mark St., Wood Dale, IL 60191 Tel : 800-568-0060 or 630-595-0123 Fax : 800-784-9422 or 630-595-2345 e-mail : service@hyundaimonitor.com NEW ZEALAND TRANSTECH DISTRIBUTORS Ltd. PO Box 12985 Penrose, Auckland New Zealand Tel : 09-571-0775 Fax : 09-571-0776 e-mail : LouisG@Transtech.co.nz WWW : www.transtech.co.nz AUSTRALIA Thomas Electronics Australia Pty Ltd. 3 Sheridan Close Milperra NSW 2214, Australia Tel : +61 2 9773 7400 Fax : 61 2 9773 7177 Attn : Ms.
FCC Information User Instructions The Federal Communications Commission Radio Frequency Interference Statement includes thefollowing warning : NOTE : This equipment has been tested and found to comply with the limits for a Class B digital devicepursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation.
HYUNDAI Digital LCD TV Important Tip Image Retention Effect (Image Sticking) 1. Cause : - Image Retention Effect may come from displaying a still picture in certain period of time with at a certain area continuously, as the feature of LCD panel. This is caused due to brightness degradation. Many LCD manufacturers are trying to overcome this limitation. 2. Prevention - To avoid this matter, use the product after reducing brightness and contrast, especially when a still image is displaying for a long time.
Image Sticking Precaution When watching a still Image within motion pictures and Panorama/Wide/4:3 screen Panorama, Wide, 4:3 screen Box still image 1. Note : - When the central area of the screen and the screen edges are fixed, the different brightness level of the edges may cause image retention on the edges when watching for a long time - This phenomenon is the same matter to other LCD manufacturers. Please do not watch a still image for a long time.
HYUNDAI Digital LCD TV Features Integrated HDTV An HDTV has a built-in ATSC digital tuner. It does not need a separate set-top box to receive over the-air DTV signal. Dual Scan/Multi-Viewing You can program analog TV broadcasting and digital TV broadcasting automatically at the same time for multi-viewing. A Wide Array of Screen Settings You can choose different screen settings depending on the type of program you are watching or the surrounding conditions (the outside weather conditions).
HYUNDAI Digital LCD TV Table of Contents General Information How to Select MTS(Multi-Channel Sound) ...........................43 Safety Precaution ................................................................5 How to Listen to SRS TruSurround XT (Surround) ................44 Contents of the Package .......................................................9 How to Set the Output of Subwoofer ...................................45 Products Sold Separately ..............................................
Safety Precaution GENERAL INFORMATION The contents of this section are provided for the safety of users and their property. Please read the instructions carefully before using. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No.
HYUNDAI Digital LCD TV GENERAL INFORMATION If there is a persistent accumulation of dusts or water on the plug, please make sure to wipe it off using a dry cloth. Do not use a damaged power cord or plug, or loose outlet. - It may cause electric shock or fire. - It may cause a fire or an electric shock. Firmly plug in the power cord so that it does not pull out. - An unstable connection may cause fire.
Safety Precaution ......................................Continued from previous page GENERAL INFORMATION The contents of this section are provided for the safety of users and their property. Please read the instructions carefully before using. Do not block ventilating slits with a table cloth. - Blocking the ventilation slits may produce inner heat increase, resulting in a fire. Keep the TV at least 10cm away from the wall for ventilation. - Fire may be caused due to the rise of inner temperature.
HYUNDAI Digital LCD TV GENERAL INFORMATION Unplug the product during lightning or thunderstorms and never touch the antenna cable. - It may cause a fire or an electric shock. Keep the remote control batteries out of sight and out reach of children. Do not install the product on the floor. - If your child swallows a battery, see your doctor immediately. - If it falls over, your child may be injured.
Contents of the Package GENERAL INFORMATION hen opening the package, please ensure to check the following accessories provided. Antenna Cable (coaxial cable) Remote Control & 2 batteries (1.5V AAA) Power Cord User's Guide Products Sold Separately If you want to purchase separately sold products, consult a service center, electronics shops, or parts seller.
HYUNDAI Digital LCD TV Kensington Lock Anti-theft Device GENERAL INFORMATION - This display unit supports Kensington standard security lock to prevent theft. - You should purchase the Kensington lock device personally, if you need. The security lock is available at an electronics shop. - For more information, please refer to the following contact information..
How to Mount and Detach The Speakers - For Q26*/Q32* Model only GENERAL INFORMATION You can attach the speakers to the base of the unit or use them separately. How to mount the speakers onto the base of the unit 1. Tilt the unit backward until its base faces to yourself (See next page How to Adjust the View Angle). 2. Prepare your right speaker first. Remove the tube of hooks and verify that the hooks place in the upright position. 3.
HYUNDAI Digital LCD TV How to adjust the view angle - For Q26*/Q32* Model only GENERAL INFORMATION You can adjust the panel downward or upward at a 0~15 degree angle.
Parts Names and Functions - For Q26*/32* Model only GENERAL INFORMATION Front View * This product image may be a bit different from the actual product. Volume buttons Use these buttons for your desired sound level. These buttons also serve as the cursor of Select/Adjust when in Menu mode. Channel buttons Use these buttons to change channels. These buttons also serve as the cursor of Down and Up buttons when in Menu mode. Select button Use this button to select each item of menu.
HYUNDAI Digital LCD TV GENERAL INFORMATION Rear View HDMI Option * This product image may be a bit different from the actual product. Power switch Use this switch to turn on/off power. Power (AC) input terminal Connect the power cord to this terminal. HDMI (or DVI) Video input terminal D-SUB input terminal HDMI (or DVI)/D-SUB Audio input terminal Subwoofer output terminal When producing bass, connect the cable to the woofer with *AMP.
GENERAL INFORMATION Parts Names and Functions - For Q40* Model only Front View * This product image may be a bit different from the actual product. Speaker Power switch Use this switch to turn on/off power. Remote sensor and power LED. - Point the remote control toward here. - It displays standby or operation status. - Power Indicator Status Indicator Status Red Standby Green Power on Power button Use this button to turn on or off the TV.
HYUNDAI Digital LCD TV GENERAL INFORMATION Rear View HDMI Option * This product image may be a bit different from the actual product. Power (AC) input terminal Connect the power cord to this terminal. HDMI (or DVI) Video input terminal D-SUB input terminal HDMI (or DVI)/D-SUB Audio input terminal Subwoofer output terminal When producing bass, connect the cable to the woofer with *AMP.
GENERAL INFORMATION Remote Control 30 17 1. POWER/STANDBY 2. MUTE This button is also used when setting up to use other external device. 3. PIP FUNCTIONS - PIP : Use this button for PIP On/Off. - INPUT : Use this button to select the input source of sub-picture. - SIZE : Use this button to select the size of sub-picture. - SWAP : Use this button to swap main and sub-picture. - POSITION : Use this button to select the position of sub-picture. 4.
HYUNDAI Digital LCD TV Using buttons when in Memory Mode GENERAL INFORMATION * For Q320/Q400 Model only 18. PICTURE MODE 19. SOUND MODE 20. BOOK-MARK Use this button to select/deselect your frequently-used channel. 21. FAVORITE Use this button when watching your favorite channel. 22. ADD/ERASE Use this button to add or erase channels. 23. INFOMATION Use this button to display resolution or various program information. 24. SOURCE Use this button to select External Input or Memory Mode. 25. VOLUME 26.
How to Watch Both Analog and Digital Broadcasts with a Single Antenna You can watch both analog and digital broadcasts by connecting a single antenna. Connection Method CONNECTIONS Make sure that the antenna cable is connected to ANT 1 (ATV/DTV). - Antenna or Cable service without a cable box connections - For optimum picture quality, adjust antenna direction if need, VHF Antenna UHF Antenna - When inserting a 75 ohm coaxial cable into the input connection, ensure the wire tip not to bend.
HYUNDAI Digital LCD TV How to Watch Both Analog and Digital Broadcasts with Two Antennas Connection Method CONNECTIONS Connect an analog antenna to ANT 1 terminal for analog source and a digital antenna to ANT 2 terminal for digital source. Please ensure to connect an antenna to a correct terminal. (If you connect an analog antenna cable to ANT 2, you cannot watch TV program.
Before Connecting the Video/Audio Connections to External Devices... Please make sure to read the following information on connection to enjoy best picture quality. Video/Audio connectors CONNECTIONS Types of video/audio cable : ➀ HDMI / DVI-D ➁ 15-Pin D-Sub ➂ COMPONENT ➃ S-VIDEO ➄ COMPOSITE Best picture quality is displayed in the following order. The superior picture quality starts from the far left side. - When connecting an external device, ensure to read the connecting device’s manual.
HYUNDAI Digital LCD TV How to Connect a VCR/Cable Receiver Connection Method Connect the Video cable or S-Video cable between Video/S-Video output terminal of VCR or Cable receiver and Video/S-Video input terminal of TV. (Connect the jacks to terminals in the same color.) 2 Connect the Audio cable (Left: white, Right: red) between Audio output terminal of VCR or cable receiver and Audio input terminal of TV. (Connect the jacks to terminals in the same color.
How to Connect a DTV Receiver or DVD Player CONNECTIONS Connection Method 1 Connect the Video cable (Y, Pb, Pr) between output terminals (Y, Pb, Pr) of DTV receiver or DVD player and the input terminals (Y, Pb, Pr) of DTV/DVD (480i/480p/720p/1080i) on the rear of TV. (Connect the jacks to terminal in the same color.) 2 Connect the Audio cable between Audio output terminal of DTV receiver or DVD player and Audio input terminal for DTV/DVD Audio on the rear of TV.
HYUNDAI Digital LCD TV How to Connect a Camcorder/Game Player Connection Method Connect the Video/S-Video cable between Video/S-Video output terminal of Camcorder/Game player and Video/S-Video input terminal of TV. (Connect cables and terminal in the same colors.) 2 Connect the Audio cable (Left-white, Right-red) between Audio output terminal of Camcorder/Game player and Audio input terminal of TV. (Connect the jacks to terminals in the same color.
How to Connect to a PC CONNECTIONS Connection Method 1 Connect the PC signal cable (15-pin D-sub) between the output terminal of PC and the D-sub input terminal of TV. 2 Connect the Audio cable between Audio output terminal of PC and Audio input terminal for PC on the rear of TV. (Connect the jacks to terminals in the same color.) Audio Cable HDMI (or DVI) Cable or D-SUB cable When Using as a PC Monitor 1 Turn on TV and press 2 Press on remote control.
HYUNDAI Digital LCD TV Resolutions Supported in PC Resolution Horizontal frequency Vertical frequency 31.47 70.09 37.86 85.08 31.47 59.94 37.86 72.80 37.50 75.00 43.27 85.01 31.47 70.08 37.88 60.32 48.08 72.18 46.88 75.00 53.67 85.06 49.72 74.55 48.36 60.00 60.02 75.03 68.68 85.
HDMI Connection - For HDMI Model only CONNECTIONS HDMI *1 (High Definition Multi media Interface) is the first all digital consumer electronics A/V interface that supportsuncompressed standard. The HDMI terminal supports both video and audio information.To the HDMI*1 input terminal, you can connect an EIA/CEA-861/861B*2 compliant consumer electronic device, such asa Set Top Box or DVD player with HDMI or DVI output terminal.
HYUNDAI Digital LCD TV Compatible sampling freguency of AUDIO signal through HDMI (L.PCM) : 48kHz / 44.1kHz / 32 kHz CONNECTIONS Notes: • This HDMI connector is Type A. • If you connect an equipment without a digital output terminal, connect to the COMPONENT VIDEO, S VIDEO or VIDEO input terminal on the TV so you can enjoy an analog signal. • The DIGITAL IN terminal can only be used with 1080i, 480i or 480p picture signals.
How to Connect an External Visual Device You can connect your TV to other visual device to watch two TV programs at the same time. CONNECTIONS Connection Method 1 Connect the Composite Video cable between Video input terminals of an external device and the Video output terminals for Video on the rear of TV. (Connect the jacks to terminals in the same color.
HYUNDAI Digital LCD TV How to Use Digital Sound Connection Method Connect the coaxial cable or optical cable to the digital audio output terminal for coaxial cable or SPDIF optical digital audio output terminal on the rear of TV. 2 Deselect Speaker Output from the Sound Menu and select Digital Sound Output. (See page 46~47) 3 For more information, read the user’s guide of the external sound device. CONNECTIONS 1 Do not look into directly the beam with the optical port.
How to Select the Picture Mode Users can automatically adjust the picture mode according to the input mode. Press Menu button. Menu items appear on the screen. PICTURE 1 2 Press button to select “MODE” is selected. Whenever you press Left or Right button, the mode changes in following order. Standard Dynamic Movie Mild Custom 1 Custom 2 Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears.
HYUNDAI Digital LCD TV How to Set the Desired Picture Users can manually adjust their desired picture. Press Menu button. Menu items appear on the screen. 1 Press button to select . Press Left or Right button to choose “User 1/2”. Press Left and Right buttons to move to Custom . 3 Press button to select Custom . Picture Adjust menu items appear. 4 Press Up and Down buttons to move. Press Left and Right buttons to adjust.
How to Adjust the Color Temperature of the Screen Users can manually adjust their desired color temperature. Press Menu button. Menu items appear on the screen. PICTURE 1 2 3 Press button to select . Press Up and Down buttons to move to “COLOR TEMP”. Whenever you press Left or Right button, the mode changes in following order. Standard Warm 1 Warm 2 Cool 1 Cool 2 Press MENU button after the setting is done, and Menu goes to the previous menu.
HYUNDAI Digital LCD TV How to Select the Aspect Ratio Users can manually adjust the size of the screen. Press Menu button. Menu items appear on the screen. 1 3 button to select . PICTURE 2 Press Press Up and Down buttons to move to ASPECT RATIO . Whenever you press Left or Right button, the mode changes in following order. Wide Normal Panorama Zoom 1 Zoom 2 Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears.
AUTO (This is applied in digital broadcasting input mode only.) The screen size automaticaly changes according to a signal source received (General broadcast 4:3, Wide broadcast 16:9) PICTURE WIDE General broadcast picture is adjusted to 16:9. Normal 4:3 general picture size Panorama Picture size for panorama video ZOOM 1 Picture enlarged to 16:9 format, letter box format.
HYUNDAI Digital LCD TV How to Watch the PIP This function allows you to watch the PIP or DW mode. Press Menu button. Menu items appear on the screen. 1 Press 2 Press Up and Down buttons to move to PIP. 3 Press Left and Right buttons to select PIP. The PIP Menu appears. 4 Whenever you press Left or Right button, the mode changes in following order. PIP SMALL PIP MIDDLE PIP LARGE DW 1 DW 2 OFF button to select .
How to Set the INPUT for the Sub-Picture This function is available only in the PIP mode. PICTURE 5 Press Up and Down buttons to move to SOURCE 6 Press Left and Right buttons to select SOURCE . The list of sub-picture sources appears. 7 Press Up and Down buttons to move to the sub-picture source you want. 8 Press Press button to select source. Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears.
HYUNDAI Digital LCD TV button. How to Set the channel of the Sub-picture Channel : Press the This is applied only when the sub-picture is displayed. button. How to Change the Position of the Sub-picture : Press the Bottom Right Corner Bottom Left Corner Left Top Corner Right Top Corner The same input mode cannot be selected for the main picture and sub-picture.
How to Noise Reduct Press Menu button. Menu items appear on the screen. PICTURE 1 2 3 Press button to select . Press Up and Down buttons to move to NOISE REDUCT . Whenever you press Left or Right button, the mode changes in following order. LOW HIGH Off Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears.
HYUNDAI Digital LCD TV How to Select the Audio Mode Users can adjust sound mode automatically as they want. Press Menu button. Menu items appear on the screen. 1 Press Up and Down buttons to move to 2 Press button to select . . MODE is selected. SOUND 3 Whenever you press Left or Right button, the mode changes in following order. Standard News Music Sport User Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears.
How to Adjust the Desired Audio Mode Users can adjust sound mode automatically as they want. Press Menu button. Menu items appear on the screen. 1 Press Up and Down buttons to move to 2 Press button to select . . SOUND Press Left and Right buttons to select USER . 3 Press Up and Down buttons to move to CUSTOM . 4 Press Left and Right buttons to select CUSTOM . SOUND CUSTOM menu appears. 5 Move between the items listed using UP or Down button.
HYUNDAI Digital LCD TV How to Use the Automatic Volume Control With this Automatic Volume Level Control, everything you watch will always maintain the volume level that you decide. Press Menu button. Menu items appear on the screen. 1 Press Up and Down buttons to move to 2 Press 3 Press Left and Right buttons to set to ON/OFF . button to select . . SOUND Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears.
How to Select MTS(Multi-Channel Sound) Depending on the particaular program being brodcast, you can select stereo, mono, or a Separate Audio Program. (SAP audio is usually a foreign-language translation. Somtimes SAP has unrelated information like news or weathter.) SOUND Press Menu button. Menu items appear on the screen. 1 Press Up and Down buttons to move to 2 Press 3 Press Up and Down buttons to move to “MTS”. 4 Press Left and Right buttons, Repeatedly to select “MONO”, “STEREO” or “SAP”.
HYUNDAI Digital LCD TV How to Listen to SRS TruSurround XT (Surround) Users can enjoy spectacular 3D sound. Press Menu button. Menu items appear on the screen. 1 Press Up and Down buttons to move to 2 Press 3 Press Up and Down buttons to move to SURROUND . 4 Press Left and Right buttons to set to ON/OFF . button to select . . SOUND Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears.
How to Set the Output of Subwoofer You can set this function when you wish to install your subwoofer system. SOUND Press Menu button. Menu items appear on the screen. 1 Press Up and Down buttons to move to 2 Press 3 Press Up and Down buttons to move to “SUB WOOFER . 4 Press Left and Right buttons to select “SUB WOOFER . SUB WOOFER menu items appear. 5 Choose one of the items listed. Press Left and Right buttons to adjust. button to select . .
HYUNDAI Digital LCD TV How to Set the Speaker Out If you wish to use an external audio system, you can turn off the TV speakers. Press Menu button. Menu items appear on the screen. 1 Press Up and Down buttons to move to 2 Press 3 Press Up and Down buttons to move to SPEAKER OUTPUT . 4 Press Left and Right buttons to select ON/OFF . button to select . . SOUND Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears.
How to Set the Digital Audio Output The digital audio output terminal allows you to enjoy digital sound. (For more details, see page 30) SOUND Press Menu button. Menu items appear on the screen. 1 Press Up and Down buttons to move to 2 Press 3 Press Up and Down buttons to move to “DIGITAL AUDIO” 4 Press Left and Right buttons to select ON/OFF. Whenever you press Left or Right button, the mode shifts in following order. Dolby PCM OFF button to select . .
HYUNDAI Digital LCD TV How to Set Audio Language While watching a digital program, you can listen to foreign language if the program is supported with foreign language. Press Menu button. Menu items appear on the screen. 1 Press Up and Down buttons to move to 2 Press 3 Press Up and Down buttons to move to AUDIO LANGUAGE . 4 Whenever you press Left or Right button, the mode shifts in following order. ENGLISH SPANISH FRANCE button to select . .
How to Store Channels Automatically - Your TV can memorize and store all of the available analog/digital broadcast signals for both “off-air” (antenna) and cable channels. - Before your television can begin memorizing the available channels, make sure to specify the type of the signal source (antenna or cable) connected to your TV. Press Menu button. Menu items appear on the screen. 1 Press Up and Down buttons to move to 2 Press button to select . . CHANNEL AUTO STORE is highlighted.
HYUNDAI Digital LCD TV 7 Press button. AUTO SCAN is activated. - In the middle of AUTO SCAN, if you press button once, analog AUTO SCAN is interrupted. If you press button a second time, digital AUTO SCAN is interrupted. Press the Menu button to exit. Then the original channel is returned. - If you have changed the connection of an antenna or cable, perform AUTO SCAN again. How to Add/Erase Channels Manually Users can add or erase the desired channels.
How to Set Favorite Channels Users can store frequently watched channels to quickly access a preferred channel. - How to store the channel you are currently watching as a favorite channel Press “BOOK-MARK” button. Then the channel will be stored while Favorite Channel Selected is displayed on the screen. - How to access the stored favorite channel CHANNEL Press FAVORITE button. You can access the favorite channel by pressing this button repeatedly.
HYUNDAI Digital LCD TV How to Fine Tune Channel Reception If the reception is clear, you do not have to fine tune channels, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually. Press Menu button. Menu items appear on the screen. 1 Press Up and Down buttons to move to 2 Press 3 Press Up and Down buttons to move to “FINE TUNE”. 4 Press button to select “FINE TUNE”. FINE TUNE menu items appear.
How to the LNA (Low-Noise-Amplifier) Feature If the reception is clear, you don’t have to use this feature. If the signal is weak or distorted, perform the following steps. CHANNEL Press Menu button. Menu items appear on the screen. 1 Press Up and Down buttons to move to 2 Press 3 Press Up and Down buttons to move to “LNA”. 4 Press Left and Right buttons to set to ON/OFF . button to select . . Press MENU button after the setting is done, and Menu goes to the previous menu.
HYUNDAI Digital LCD TV How to Choose Your Language Users can select their language preference in order to display main menus and sub menus, etc. Press Menu button. Menu items appear on the screen. 1 Press Up and Down buttons to move to 2 Press button to select . . LANGUAGE is highlighted. 3 Whenever you press Left or Right button, the mode shifts in following order. ENGLISH FRANÇAIS ESPAÑOL Press MENU button after the setting is done, and Menu goes to the previous menu.
How to Set Clock, On/Off Time, Sleep Time - You can automatically turn on or off the TV at a preset time. To do this, you must set the clock if you wish to use the automatic on or off timers. - No Signal Timeout allows you to automatically turn off the TV if there is no broadcast signal for a certain period of time. Press Menu button. Menu items appear on the screen. 1 Press Up and Down buttons to move to 2 Press 3 Press Up and Down buttons to move to “TIME”. 4 Press button to select “TIME”.
HYUNDAI Digital LCD TV Continued from previous page..... (Set the SLEEP TIMER and NO SIGNAL TIMEOUT) 10 - To set SLEEP TIMER : Press Left button to exit and press the down arrow button to move to “SLEEP TIME”. 11 Whenever the Left or Right button, the mode shifts in following order. 30 60 90 120 240 12 - To set NO SIGNAL TIMEOUT : Press Up and Down button to move to “AUTO OFF”. 13 Press Left and Right button to select ON/OFF .
How to Set the Geometry in PC Mode This function is only available in PC mode. SETUP Press Menu button. Menu items appear on the screen. 1 Press Up and Down buttons to move to 2 Press 3 Press Up and Down buttons to move to “IMAGE ADJUST”. 4 Press button to select “IMAGE ADJUST”. Then the IMAGE ADJUST items appear. 5 Press Up and Down buttons to move to items you want. Press Left and Right buttons to adjust. button to select . .
HYUNDAI Digital LCD TV How to Set Key Lock This function is used to prevent from using the control buttons on the front top of the TV or from connecting external devices to the TV. You make sure to set a PIN number to use this function. Press Menu button. Menu items appear on the screen. 1 Press Up and Down buttons to move to . 2 Press 3 Press Up and Down buttons to move to “LOCK”. 4 Press button to select “LOCK”. Then the Enter PIN number window appears. The default is 4 digits (0-0-0-0).
Continued from previous page..... (Set the Lock External Signal function.) 10 - To set Aux Block : Press Up and Down buttons to move to “AUX BLOCK”. 11 Press button to select “AUX BLOCK”. Then the AUX BLOCK items appear. 12 Press Up and Down buttons to move to the item you want. Press Left and Right buttons to set to ON/OFF . If the item is set to ON, such item is disabled. SETUP Press MENU button after the setting is done, and Menu goes to the previous menu.
HYUNDAI Digital LCD TV How To Set Block Program This(V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and by the categories chosen to be blocked. V-Chip rating and categories Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by TV Rating and/or Individual Categories.
SETUP ...... Continued from previous page. 1 Press Menu button. Menu items appear on the screen. 2 Press Up and Down buttons to move to and press buttons to select. The message “Enter PIN” will appear. 3 Enter your 4-digit PIN number. The new screen will appear. 4 Press Up and Down buttons to move to “BLOCK PROGRAM” and press buttons to select. The new screen will appear. 5 Press Left and Right buttons to “ON”. 6 Press Up and Down buttons to move to “TV-Guide” or “MAPP”.
HYUNDAI Digital LCD TV How to View Closed Captions Choices in the closed caption menu are : CC Mode, Priority (Analog caption or Digital caption), and Option. 1. CC MODE : ON : Captioning information is always shown, when available. OFF : No captioning information is displayed. On mute : Captioning information is only when the TV's sound is mute, when available.
...... Continued from previous page. 3. OPTION : Customized closed captioning for the digital caption by choosing the settings for the following options : SIZE : Set the size of the words - AUTOMATIC -> STANDARD -> LARGE -> SMALL. TEXT COLOR : Chose a color for the text - AUTOMATIC -> WHITE -> BLACK -> RED -> GREEN -> YELLOW -> MAGENTA -> AND CYAN. TEXT OPACITY : Specify the opacity for the text color - AUTOMATIC -> SOLED -> TRANSPARENT -> TRANSLUCENT.
HYUNDAI Digital LCD TV How to Use the Current Channel Guide Users can get information on broadcasting time and signal status of the current digital channels. Press Menu button. Menu items appear on the screen. 1 Press Up and Down buttons to move to and press button to select. 2 Press button again to select the “CURRENT CHANNEL Guide”. The information on broadcasting time and signal status, etc. of the channels your are currently watching will be displayed.
How to Use TV Program Reservation If you have scheduled a TV program you are going to watch, the channel you are currently watching is automatically switched to the scheduled channel, or when your TV is in stand-by, the scheduled TV program is on at the defined time. If the AC power is off, this function is deactivated. Continued from previous page. 4 Press Up/Down and Left/Right buttons to move to a TV program to be scheduled. 5 Press button. A window “Will you schedule this program?” appears.
HYUNDAI Digital LCD TV How to Check or Cancel a Scheduled TV Program Users can look through scheduled TV programs or remove a scheduled program from a listing of scheduled programs. Press Menu button. Menu items appear on the screen. 1 Press Up and Down buttons to move to 2 Press 3 Press Up and Down buttons to move to “RESERVATION LIST”. 4 Press button to select “RESERVATION LIST”. The Reservation List will appear.
How to Use Memory Mode Please read the following instructions carefully before use. - For Q320/Q400 Model only Precautions when using a Memory Card Ensure to use a memory card labeled with the manufacturer’s name and manufacture number. Do not insert other objects such as a coin than a memory card into the memory card slot, which may cause a malfunction. Do not drop or apply a shock to memory cards. Keep a memory card in the provided case after use. Do not dismantle or modify memory cards.
HYUNDAI Digital LCD TV Supported Files CompactFlash : 8MB ~ 4GB Microdrive : 1GB, 2GB, 4GB / 2.5GB, 5GB SmartMedia : 8MB ~ 128MB xD-Picture : 16MB ~ 512MB / 1GB(M-CARD) MultiMediaCard/RS MMC : 8MB ~ 1GB Secure Digital/miniSD : 8MB ~ 1GB Memory Stick/Duo : 4MB ~ 128MB Memory Stick Pro/Duo : 256MB, 512MB, 1GB Available memory card capacity Using a memory card with capacity larger than the unit is capable of supporting may cause an error. A very high capacity of a memory card may result in slow speed.
Using a Memory Card 1. Insert a memory card or USB memory into Slot 1/2 or USB port. 2. Press 3. Press to power on. to select Memory Mode. Memory Card Slot 2 (CF) 4. Refer to icons listed below menu screen to manipulate. CAUTION ! When you are going to remove the memory card, press the button on the remote control. You can go back to the initial screen anytime to remove the memory card safely while keeping the damage to stored data to a minimum level.
HYUNDAI Digital LCD TV Viewing the stored photo files Current page/All pages Mode Card type/capacity Preview Manipulation buttons Viewing full-size photos 1. Press to select. To the icon menus, press the MEMORY MODE Press to move a photo file you want. button. 1) JFIF - As decording is required when making a listing, decording time is different according to file sizes.
Viewing full-size photos Whenever you press from the current screen, magnifying powers are shifted in sequence 1X(original size). After zooming in a photo, press to move. 1.5X 2X 2.5X Rotating a photo To rotate the photo by 90 degrees clockwise, press counterclockwise, press button. To rotate the photo by 90 degrees button. Viewing images using Slide Show 1. Press to display Option Menu. MEMORY MODE 2. Press to move between items and press to change. 3.
HYUNDAI Digital LCD TV Viewing the stored music files Artist/File size Selected file/All files Mode Card type/Capacity File name/Playing time Manipulation buttons When you press , the slide show function starts playing back music files according to the selected options in photo mode. ModeaMusic file name File information 1. Press 1. Press MEMORY MODE Playing back music files to display Option Menu. to play back. Whenever you press , you can set Repeat 1 Play Sequence.
Checking the stored movie files Playing time/File creation date File order/All files Playback mode Mode File name/Playing time Card type/Capacity Manipulation buttons You can set to play back all files (Play Sequence) or selected file (Play One) in sequence by pressing . MEMORY MODE Playing back movie files 1. Press to move to movie file you want. 2. Press to select a movie file to play back. To hide the icon menus on the bottom of the screen, press .
HYUNDAI Digital LCD TV - Slow access may take place according to card types (MMC/MS). This may result in interruption of a motion picture being played back. - When playing back a motion picture stored in a USB memory, an interruption may take place. This phenomenon is not because the product yields its low performance but because the transmission speed differs depending on the USB memory types.
How to Use an External Device Using the Remote Control When setting other manufacturer s product using the remote control, some of the buttons on the remote control may not operate or different functions may be activated, or some of other manufacturer s products may not work. Some of DVD/VCR combos are allowed only either in DVD mode or VCR mode. 1. Turn on the external device you want to set. 2. Whenever you press VCR DVD CATV button on the remote control, the mode shifts TV in order. 3.
HYUNDAI Digital LCD TV DVD Setting Number Table APPENDIX 76
APPENDIX AMP Setting Number Table CATV Setting Number Table 77
HYUNDAI Digital LCD TV Glossary 1 Component video Component video is sent through three cables: two color shade (chrominance) signals and one brightness (luminance) signal. Component video achieves greater color accuracy than composite video or S-VIDEO by splitting chrominance into two separate portions. Composite video Composite video is sent through a single cable. Composite video combines the color shade (chrominance) and brightness (luminance) information into one video signal.
Glossary 2 DVD Coaxial Cable LNA (Low-Noise-Amplifier) Aspect ratio PIP (Simultaneous Screen) SWAP Picture Mode Sound Mode APPENDIX Coaxial cable is the kind of rounded copper cable, which is generally used for TV antenna. Satellite applied technology. It is capable of amplifying weak signals so that any area experiencing a signal interruption may enjoy a clearer picture quality. Refers to the ratio between the width and height of the screen.
HYUNDAI Digital LCD TV Glossary 3 Subwoofer Mono Stereo Widescreen Panorama screen External source Designed to improve ultra low frequency with about 150Hz. There are active type that is built with a built-in amplifier and passive type that is required to connect an additional amplifier to it. Audio signals are produced through a single channel. It is difficult to experience a spectacular sound since audio signals are reproduced with a single speaker. Audio signals are produced through two channels.
Troubleshooting Installation Problems Symptom How can I install an antenna? TV screen is not clear after installing an indoors antenna. How can I view cable broadcasting? Possible solution Refer to pages 19~20. Indoors antenna may experience poor reception due to surrounding buildings. Please install an outdoors antenna or wireless antenna. Please install a cable broadcasting receiver (Converter). Picture Problems Symptom Neither picture nor sound comes up. Picture turns on slowly after power is on.
HYUNDAI Digital LCD TV Auto On does not work. Ensure to use the remote control or power button on the product to turn off your TV. If you unplug the power cord, the stand-by consumption power becomes 0 (zero), which causes the programmed time to be erased. After setting the time, I turned TV off and turn it on. The programmed information has been erased. Ensure to use the remote control or power button on the product to turn off your TV.
Care and Cleaning Cabinet Cleaning Wipe a soft dry cloth. Do not use inflammables like Benzene or Thinner, or wet clothes. Do not scratch the panel of PDP with a fingernail or pointed object. Screen Cleaning Clean the screen with a soft cloth moistened in mild glass detergent and dry with a soft cloth. Never use any solvent on the screen such as Acetone, Benzene, or Thinner, etc.
HYUNDAI Digital LCD TV Product Specifications Q261 Q320/Q321 Q400/Q401 S-Video 1EA (A/V audio common) 1EA (A/V audio common) 1EA (A/V audio common) Video (RCA) 1EA (Audio included) 1EA (Audio included) 1EA (Audio included) Component(Y/Cb/Cr) 2EA (Audio included) 2EA (Audio included) 2EA (Audio included) Antenna 2EA (ANT1+ANT2) 2EA (ANT1+ANT2) 2EA (ANT1+ANT2) PC Connection jack D-SUB D-SUB D-SUB Max.
