MSDS

中国石油化工股份有限公司润滑油分公司
Spill Management
FOR LARGE SPILLS: Remove with vacuum truck or pump to storage/salvage
vessels.
FOR SMALL SPILLS: Soak up residue with an absorbent such as clay,
sand or other suitable material. Place in non-leaking container and
seal tightly for proper disposal.
7) HANDLING AND STORAGE
Storage
Do not store in open or unlabeled containers. Store in a cool, dry
place with adequate ventilation. Keep away from open flames and high
temperatures.
Empty container
waining
Empty containers retain residue (liquid and/or vapor) and can be
dangerous. DO NOT PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL, GRIND
OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME.
8) EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure controls
Provide adequate ventilation to control airborne concentrations below
the exposure guidelines/limits.
Respiratory
Protection
If engineering controls do not maintain airborne concentrations to a
level which is adequate to protect worker health, an approved
respirator must be worn.
Eye Protection
Chemical Goggles, or Safety glasses with side shields
Hand Protection
Use protective gloves which is chemically resistant to this material
Personal protection
Use protective clothing and shoes which are
chemically resistant to
this material.
Note to sanitation
Wash hands with water an use cosmetic to protect
9) PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Brown and transparent
liquid
Odor
No peculiar smell
Flash point （COC）℃
（GB/T 3536）
>215
10) REACTIVITY AND STABILITY
Stability Stable （
at room temperature
）
Conditions and
materials to avoid
Extreme heat and high energy sources of ignition and strong oxidizers
Hazardous
decomposition
product
Product does not decompose at ambient temperatures.
Hazardous
polymerization
Will not occur.
11) TOXICOLOGICAL INFORMATION
Acute Toxicity
ORAL TOXICITY (RATS): Practically low toxic (LD50: greater than
5000mg/kgBW). — -Based on testing of similar products and/o
r the
components.