Instructions / Assembly

30.

1. Clean the impeller and drain all the water out.

2.Drainoutthegasolineandstorethecontainerinaheat,ame

and spark free place.

3. Change the engine oil by draining the old and replacing it with

the new.

4. Slide the fuel valve to the OFF position.

5. Place the water pump in an appropriate storage area at tempera-

tures above 0

6. Cover the intake and discharge port.

7. Cover the entire pump with fabric to protect it from dust.

5.11: External Parts Cleaning

Keeping the external parts clean can prevent debris build up/hard-

ening, and ensure easy access during maintenance periods.

1) Place the water pump in a well lit area

2) Use a grease/oil removing solvent and a cloth to clean areas

around the gas tank and the oil dipsticks.

3) Using a damp cloth to rub off the remaining residue and any

debris.

4) Allow the unit to air dry

WARNING

Never pressure wash the water pump as water may

damage electrical components.