Instructions / Assembly

15.
EN
3.6: Priming Water
NOTICE:
Prior to running the pump, always make sure to prime it with water.
Primingwillcreateavacuumthatwillhelptostartthewaterow.
1. Unscrew the primer cap
2. Insert the neck of the water container into the opening and
graduallytiltuntilthereservoirisfull.(RefertoFig.3.7)
3. Tighten the cap back on
4. In case of a dry operation, stop the engine immediately and al-
low it to cool before priming.
Fig. 3.7
Primer Cap
WARNING
Never run the pump unprimed as doing so will overheat
and damage the engine.
CAUTION
Avoid spilling water when filling the storage container.