User Manual

EM -62 ENGINE MECHANICAL SYSTEM
INSTALLATION EE5ABFA8
1. Install oil jet (1) to the cylinder block.
1
SUDEM7182L
2. Install thrust plate (1) and upper main bearing (2) to
the crankcase.
CAUTION
a. Install the thrust plate with the oil grooveless
side toward the crankcase.
b. Align the lug groove of crankcase with the lug
of main bearing.
c. Since there is oil hole at upper bearing, take
care not to be interchanged with lower bear-
ing.
d. Apply engine oil on the all over the sliding
surface.
2
1
SUDEM7183L
3. Install the crankshaft (1) to the cylinder block.
CAUTION
Handle crankshaft carefully not to be damag ed.
1
SUDEM7184L
4. Install the front, rear and main bearing caps.
a. Insert the lower main bearing (1) into bearing cap
(2).
NOTE
Check to see whether the main bearing lug matches
main bearing cap lug groove.
b. Install thrust plate (3) to the rear-bearing cap.
2
1
3
SUDEM7185L