User Manual

EM -52 ENGINE MECHANICAL SYSTEM
REMOVAL EE4DAE0F
1. Remove the engine and transaxle.
2. Remove the flywheel and rear plate.
3. Remove the intake and exhaust manifold.
4. Remove e the cylinder head assembly.
5. Remove the supply pump (1) and common rail assem-
bly (2).
1
2
SUDEM7281L
6. Remove the V-belt (1) and remove the alternator as-
sembly (2).
2
1
SUDEM7142L
7. Align the timing mark (2~3 side) of crankshaft damper
pulley to the compression TDC of cylinder No. 1.
NOTE
As for the removal of cooling fan pulley, crankshaft
damper pulley and timing gear case, refer to the re-
moval proc ed u re of timing system.
SUDEM7143L
8. Remove oil cooler assembly.
1
SUDEM7144L
9. Remove timing gear train [(oil pump gear (6),
camshaft assembly (2), idler gear A (3), idler supply
pump gear (5)), and then remove front plate.
5
4
3
2
6
1
SUDEM7145L