User Manual

CYLINDER HEAD ASSEMBLY EM -43

REASSEMBLY EBF48CA7

ROCKER AND ROCKER SHAFT ASSEMBLY

1. Install rocker shaft bracket No. 1, 2, 3 and 4 to the

rocker shaft.

2. Install the rocker shaft spring.

3. Apply engine oil on the rocker bush, and then install

thebushtotherocker.

4. Install the rocker assembly.

5. Install the front and rear rocker shaft bracket.

6. Install the front and rear rocker shaft bracket set bo

lts.

Tightening torque: 7.8~11.8 Nm

(0.8~1.2 kgf.m, 5.8~8.7 Ib-ft)

Rocker

bush

Set bolt

Rocker shaft

Rocker shaft spring

Rocker assembly

Front rocker shaft bracket

Rear rocker

shaft bracket

SUDEM7093L

VALVE AN D CYLINDER HEAD ASS EMBLY

1. Install the water director to the cylinder head.

SUDEM7096L

2. Install the intake and exhaust valve.

SUDEM7118L

3. Apply the engine oil on the valve stem seal lip and in-

stall the valve stem seal using the special tool (09222-

45100).

NOTE

Tap the seal until the special tool (09222-45100) con-

tacts the cylinder head.

09222-45100

Cylinder head

Valve

Valve stem seal

SUDEM7119L

CAUTION

When installing the vavle stem seal (1), use the

new one.