User Manual

CYLINDER HEAD ASSEMBLY EM -37
2. Remove the retainer (1), valve spring (2), valve stem
seal (3) and intake and exhaust valve from the cylinder
head.
CAUTION
Valve stem seal should be replaced with new one.
1
2
4
3
SUDEM7095L
3. Remove the water director (1) from the cylinder head.
NOTE
If water director is corroded, remove it. If not, leave it.
1
SUDEM7096L
4. Remove the cylinder gasket (1).
CAUTION
When removing the cylinder head gasket, check
the cylinder head and crankcase for any damage .
1
SUDEM7097L
INSPECTIO N E5264C2D
1. Check to see whether valve cap (1) and retainer (2)
have any irregular wear.
2. Check the intake and exhaust valve (3) for any stuck,
crack or damage.
1
2
3
SUDEM7098L