User Manual

EM -20 ENGINE MECHANICAL SYSTEM

7. Remove the crankshaft damper pulley nut (2) and re-

move the crankshaft damper pulley (1).

SUDEM7024L

8. Remove the engine coolant temperature sensor (1)

connector and remove the thermostat housing (2)

from the cylinder head.

SUDEM7025L

9. Remove the cam speed sensor (1) from the timing

gear case and then remove the timing gear case (2).

SUDEM7026L

NOTE

Check the front oil seal (1) state. If it is normal, do not

remove it.

SUDEM7027L

CAUTION

Before removing the timing gear case, remove

timing gear case mounting bolt (1) at the supply

pump first.

If the mounting bolt at the supply pump is not re-

moved, timing gear case will not be removed.

SUDEM7028L