H- CMD7079 DVD RECEIVER WITH BLUETOOTH Instruction manual DVD- C BLUETOOTH
Dear customer! Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future. Table of contents Table of contents ............................................................................................................................................2 Important safeguards ...................................................................................
Important safeguards Using the device at temperature below -10º may cause the breakage of the device. Before using please heat up the passenger compartment to the recommended temperature! Read carefully through this manual to familiarize yourself with this high-quality system. Disconnect the vehicle's negative battery terminal while mounting and connecting the unit. When replacing the fuse, be sure to use one with an identical amperage rating.
Installation/Connections First complete the electrical connections, and then check them for correctness. If you are not confident working with electrical wiring, removing and reinstalling interior panels, carpeting, dashboards or other components of your vehicle, please call your dealer in order to have the unit professionally installed. Before the installation 1. Remove the old unit from the dashboard. Remove the outer trim frame.
Installation method A WARNING: Disconnect negative battery terminal from battery before starting installation. Consult the vehicle’s owner’s manual for proper instructions. Remove two transport screws from the top of the unit before installation. 1. After removing the old unit and mounting sleeve, insert supplied mounting sleeve in the opening. 2. Bend the tabs on the mounting sleeve to keep the mounting sleeve firmly in place. 3. Attach wires from the unit to existing wires. See wiring connections diagram.
Installation method B Note: Outer trim frame, hook, and mounting sleeve are not used for this installation. This is only intended as a general guide; contact the vehicle's manufacturer for specific instructions. This method of installation uses the screw holes at the sides of the unit and the holes of the existing vehicle mounting bracket. 1. Remove the hooks on both sides. 2. Align the screw holes of the mounting bracket supplied with the car and the screw holes of the main unit.
Electrical connections Speaker Wiring Notes Follow the above wiring diagram to install the head unit with new or existing speakers. This unit is designed for use with four (4) speakers with the impedance between 4 Ohms to 8 Ohms. An impedance load of less than 4 Ohms could damage the unit.
Never bridge or combine the speaker wire outputs. When not using four speakers, use electrical tape to tape the ends of the unused speaker outputs to prevent a short circuit. Never ground the negative speaker terminals to chassis ground. Using the ISO Connector 1. If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated. 2.
Panel controls Front panel 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13.
14. 15. 16. 17. 18. 19. 20. 21. SD slot EJECT button LCD display Remote control sensor DISC slot ANSWER button VOL/SEL knob END CALL button Back of the front panel 1. 2. 3. 4.
Remote control (RC) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22.
23. 24. 25. 26. 27. VOL+/VOL-/SEL buttons AUDIO button Numeric pad CLOCK DISPLAY/END CALL button PHONE button Battery information of RC 1. Press the catch and at the same time pull out the battery tray. 2. Insert the 1 x lithium battery, type CR 2025 3V battery with the stamped (+) mark facing upward. Insert the battery tray into the RC. Warning: Store the battery where children cannot reach. If a child accidentally swallows the battery, consult a doctor immediately.
Glossary PBC (PlayBack Control) PlayBack Control is a menu recorded on the disc with SVCD or VCD2.0 format. For the discs contained PBC, it can playback interactive software with the menu displayed on TV. And if the disc contains still images, it can playback high definition of still image. Title The title is the important part of DVD disc. The memory volume of the disc is rather big, that makes possible to record several films on one disc.
General operations Reset the unit Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press RESET button to restore the unit to the original factory settings. Power button Press POWER button to turn on the unit. Press POWER to switch the power off. When you switch off the system or car ignition, the settings, tuner presets and the volume level will be retained in the unit’s memory.
ROCK => FLAT. Keep pressing SEL/VOL knob for 2 seconds to select the RDS function: TA SEEK/ALARM => RETUNE L/S => MASK DPI/ALL. TA (Traffic Announcement) mode To determine what action will the radio take if the newly tuned station does not receive TP (Transport Program) information for 5 seconds. Rotate the VOL/SEL knob to select the desired mode: TA ALARM and TA SEEK.
To mask only the AF with different PI. - MASK ALL To mask both PI and strong signal non-RDS station. Mute Press the MUTE button to activate the Mute function. Press it again or use the VOL/SEL knob on the panel or press the VOL+/VOL- buttons on the RC to cancel. Adjusting clock 1. 2. 3. 4. 5. Press and hold CLOCK DISPLAY button for more than 3 seconds to select the hour setting. Hour digits will blink. Rotate VOL/SEL knob to set the hours. Press VOL/SEL knob to select the minute setting.
Radio operations Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not available in you area, the following service is not available, either. Choose Radio Band Press BND/SYS button on the RC or BD/NP/SUB button on the panel to select a band. The unit has with five bands: FM1, FM2, FM3, MW1 and MW2. Each of the five bands can store up to six preset stations, for a total of 30 preset memory stations.
Save Your Preset Stations There are six numbered preset buttons, which can store and recall stations for each band. If while listening to a radio station you would like to save the station as a pre-set, press and hold one of the numeric buttons 1-6 until you hear a beep. The button you pressed is now the pre-set button for that station. Automatic Store/Preset Scan Automatic Scan and Store While listening to the FM radio, press and hold APS button for 3 seconds.
so that you do not have to re-tune the stations when driving between different transmitter coverage areas. When AF is on, it means RDS information is received; when AF is flashing, it means RDS information is not yet received. TA - TRAFFIC ANOUNCEMENT Press 8/TA numeric button on the panel so that the unit will be activated for reception of traffic announcement from local radio stations. To choose the TA mode, press and hold SEL button for 2 seconds, the display will show TA SEEK.
DVD operations Insert/Eject disc Insert a disc into disc slot with label side up. The disc will be automatically loaded into the unit, even when it is off or in radio mode. The word “LOAD” will show on the display and the disc will play automatically. Press EJECT button to eject the disc from the slot. If the disc is not removed from the slot within 5 seconds, it will automatically be loaded into the slot again. When the disc is ejected and removed, the unit will automatically switch to radio mode.
Panel Numeric Pad functions The number 1-6 buttons contain dual functions during disc play. After pressing SETUP button (button 6 on the panel), the setup menu will be prompted. Then the number buttons are for navigating and confirming the commands. Button 1: Left/Display OSD Press the button 1 to navigate the setup menu leftward. Press and hold the button for 3 seconds for OSD functions, so that disc details will be displayed. Button 2: Right/Repeat Press the button 2 to navigate the setup menu rightward.
Button 5: ENTER/Stop Press the button 5 as the ENTER button for confirming the commands on the setup menu. Press and hold the button for 3 seconds to stop the disc. The unit will be idle until further command is given. Press and hold the button 6 to play the disc again. Button 6: SETUP/Play/Pause Press the button 6 to call the setup menu. The menu will show in the display. Use the button 1-5 to navigate and confirm the commands. Press again to turn off the setup menu.
Slow Motion Press SLOW button on the RC to perform slow motion of the video play. Slow motion speed within 1/2 up to 1/8 will be shown, according to the slowness. Cycle back to normal playback of press PLAY/PAUSE button to resume. Multi-Angle View Press ANGLE button on the RC to perform multi-angle playback. The number of angles is changed sequentially. Note: The number of angles is different according to the disc. The function only work for discs having scenes recorded at different angles.
Mixed-disc operations While you are playing mixed disc, which contains MP3, WMA, JPG or DivX formats, just insert the disc into the CD slot and the menu on the right hand side will be prompted. The unit will directly play the audio files. However, you can use the cursor buttons and ENTER button to select the format that you would like to view/listen to. Audio mode Audio files will be played directly if they are presented in the mixed disc. Use the cursor and ENTER buttons to choose the folder and file.
Button 1-6 The functions of button 1-6 also apply to the mixed-disc play (See “DVD Operations” above). Return to the menu If you would like to go back to the playlist menu to choose the other file to view/listen to, press and hold button 5 to stop the playback. Then the playlist menu will be prompted and you can select other files.
VCD/CD/MP3 operations Insert/Eject CD Insert a disc into CD slot with label side up. The disc will be automatically loaded into the unit, even when it is off or at radio mode. The word “LOAD” will show on the display and the disc will play automatically. Press EJECT button to eject the disc from the slot. If the disc is not removed from the slot within 5 seconds, it will automatically be loaded into the slot again. When the disc is ejected and removed, the unit will automatically switch to radio mode.
Audio Selection Press AUDIO button on the RC to choose the audio language. The audio languages available differ from disc to disc. You can also use the setup menu to confirm. VCD: Press AUDIO button during playback. It is possible to switch the sound between mono and stereo sound. The sequence is as follows: Left Vocal --> Right Vocal --> Mono Left --> Mono Right --> Stereo CD: Press AUDIO during playback. It is possible to switch the sound between mono and stereo sound.
AUX in, RCA out, SUB out, Video out and USB/SD operations Auxiliary Input The Auxiliary input jack is on the front of unit. Use the stereo jack wire (included) and connect to the stereo plug of the unit. Route the other end of the wire to the any external audio device. Press and hold the MODE button to choose AUX in. Use the VOL/SEL button to adjust volume. RCA Output The RCA output jack is on the back of the unit.
USB and SD Card Insert USB flash drive or SD memory card in corresponding slot on the panel. The unit will automatically detect and play files. Following file types are supported by the unit: MP3, MP4, DivX, JPG. Press MODE button on the panel or RC to change current mode. The other operations are the same as in disc operations.
Menu operations Press SETUP button on the RC to display setup screen, use cursor LEFT/RIGHT and ENTER buttons to select the desired item: System, Language, Audio, Video, Digital. System setup TV system Select the TV system in the setting menu. Screen saver The screen saver appears if disc stop last more than 3 minutes. Original setting: On.
Video output mode Original setting: INTERLACE-YUV. Setting TV type Select TV type to watch wide screen movies. 4:3 Pan Scan: For 4:3 TV, left and right edges will be cut. 4:3 Letter Box: For 4:3 TV, black bars will appear on top and bottom. 16:9: For 16:9 wide screen TV. Setting password Original password is 0000.
Setting rating The rating of the disc is from 1 to 8: (1) with the most limits when playing. (8) with the least limits when playing. Original setting: 8 Note: The rating can be selected only under the password unlocked status, and the limits can be worked only under the password locked status. Load default If this item is selected, the unit will return to original setting. Language setup Setting the on-screen display language Select the language to be used for the on-screen display.
Setting the audio language Select the language to be used for the audio. You can select a preferred audio from those included on the DVD video disk. (The screen on your player may have difference with the screen shown here). Setting the subtitle language Select the language to be used for the Subtitles. You can select a preferred subtitle from those included in the DVD Video disk. (The screen on your player may have difference with the screen shown here).
Audio setup Digital output Select digital output format. SPDIF/OFF: There is no signal output from coaxial or optical output. SPDIF/RAW: When the unit is connected with the amplifier by coaxial or optical connecter, please select this mode. SPDIF/PCM: When the unit is connected with the two-channel digital stereo amplifier, please select this mode. Setting volume Setup the volume with the UP/DOWN cursor buttons. Video setup Brightness Set the brightness of the video output with UP/DOWN cursor buttons.
Contrast Set the contrast of the video output with UP/DOWN cursor buttons. Hue Set the hue of the video output with UP/DOWN cursor buttons. Saturation Set the saturation of the video output with UP/DOWN cursor buttons.
Sharpness Set the sharpness of the video output with UP/DOWN cursor buttons. Digital setup Output mode Select the output mode: LINE OUT: Compress the input signal. The volume is small. RF REMOD: The volume is large. Dynamic range When you select the compressed mode as “line out”, select it to adjust the compression proportion and get the different compressed effect. When select FULL, the audio signal is minimum; when select OFF, the audio signal is maximum.
Dual mono Select the audio channel from STEREO, MONO L, MONO R and MIX MONO.
Bluetooth operations Pairing First, make sure the bluetooth function in your headset is set to “ON”. Then press and hold PHONE button until “PAIRING” blinks on the display waiting for the bluetooth device to connect. At this time, please run the bluetooth search and connect function in your cell phone. The unit model number will be shown on the cellphone as “BT car stereo”. Select this item and connect.
Answering call on the front panel When there is an incoming call, press ANSWER button to receive a call in your unit. You can perform this function on the front panel or on the RC. Ending call on the front panel When you have finished a call, or you do not want to answer it, press END CALL button anytime to hang up. “Hang up” will be displayed on the LCD. You can perform this function on the front panel or on the RC. Auto Connect This unit supports the “Auto Connect” function.
speakers. Note: It is highly recommended that A2DP mode should not be used simultaneously with Phone mode. Please quit A2DP mode before attempting to make any phone call, otherwise unexpected results would occur, depending on different cell phone models.
Handling discs Dirty, scratched or warped discs may cause skip ping or noise. Handle the disc only by the edges. To keep clean do not touch its surface. Discs should be stored in their cases after use to avoid scratches. Do not expose discs to direct sunlight, high humidity, high temperature or dust. Prolonged exposure to extreme temperature can wrap the disc (such as leaving the discs in your car during summertime). Do not stick or write anything on either side of disc.
Troubleshooting guide Symptom Cause Solution General No power The car ignition is not on. The fuse is blown. If the power supply is properly connected to the car accessory switch the ignition key to “ACC”. Replace the fuse. Disc Disc cannot be loaded. Presence of disc inside the player. Remove the disc in the player then put a new upward. Disc cannot be read. Inserting the disc in upside down. Compact disc is extremely dirty or defective. Temperature inside the car is too high.
Specification General Power supply: Fuse: Maximum power output: Dimensions (W x H x D): ESP function FM stereo radio Frequency range: Sensitivity: Preset memory: MW section Frequency range: Preset memory: DVD deck specification Format: Disc types: Video system/Audio system: Video specification Video system: Video output level: Horizontal resolution: Audio specification Maximum output: 12V DC 10 A and 1 A 50W x 4 178 x 51 x 178 mm 10 sec. for Audio-CD, 120 sec for MP3 87.5 – 108.
Frequency response: S/N ratio (A-vtd)/Separation: Line out Output: Bluetooth Bluetooth compatibility 20 Hz to 20 KHz 80dB/50dB 2 channels RCA line-out (2V) V 1.2/2.0 Specifications are subject to change without notice. Dimensions are approximate.
! . , , . ........................................................................................................................................................45 ...................................................................................................................................46 ...................................................................................................................................47 ............................................................................
-10º . ! , . . , , . , . . , , . , . , , . , , , . . , , . , , , , , . . , . , . . . .
. , , , . 1. . . , , . , . ! 2. . . . , . . (+ ). . , .
A : . . 1. . 2. 3. . . . . . 4. .
: , . , . , . 1. 2. . . 2 . . 3. , .
. 4 4 , 4 50 8 . .
. 4 , . . ISO 1. ISO, , . 2. ISO , . , .
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. USB 13.
14. SD 15. 16. LCD 17. 18. 19. 20. 21. 1. 2. 3. 4.
( 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22.
23. 24. 25. 26. 27. VOL+/VOL-/SEL AUDIO CLOCK DISPLAY/END CALL PHONE : 1. . 2. CR 2025 3 , + . . : . , . , , . , . , , , .
PBC ( ) – , . , PBC, . . – DVD. 1, . , , 3. 2 , . , . . – . . , .
RESET, . : , , . POWER, . . POWER, , , – RADIO, DISC PLAY, USB, SD Card AUX. . MODE VOL/SEL VOL+/VOL- , . VOL/SEL, : VOL => BAS => TRE => BAL => FAD => LOUD OFF => LOC OFF => STON => EQ OFF. VOLUME ( ): VOL/SEL VOL+/VOL, .
FADER ( ): VOL/SEL, . LOUD: . LOUD ON ( .) VOL/SEL, LOUD OFF ( .). LOC: VOL/SEL, : LOCAL ON ) LOCAL OFF ( ./ ). STEREO: VOL/SEL, : STEREO ON STEREO OFF. EQ: VOL/SEL, , : OFF ( .) => CLASSIC => POP => ROCK => FLAT. VOL/SEL 2 , RSD: TA SEEK/ALARM => RETUNE L/S => MASK DPI/ALL. ( ) TA TA, TP ( ) , . , : TA SEEK ALARM. - TA SEEK: , TP (Traffic Program – ) - RETUNE SHORT (30 ) RETUNE LONG (90 ), , PI ( ), , TP. ALARM: , . . RETUNE Retune-S Retune-L – TA Seek. - RETUNE S: , TA SEEK 30 .
- RETUNE L: : MASK , Retune TA SEEK 90 . TA SEEK. TA , . , . AF . , : MASK DPI VOL/SEL MASK ALL. : , - MASK DPI: . - MASK ALL: , MUTE, VOL+/VOL- RDS. . VOL+/VOL- 1. 2. 3. 4. 5. , , . CLOCK DISPLAY . VOL/SEL, VOL/SEL, VOL/SEL, CLOCK DISPLAY . 3 , . . . . .
: RDS RDS ( ) . , BND/SYS FM1, FM2, FM3, MW1 30 . 5 , : PREVIOUS/NEXT , . BD/NP/SUB MW2. NEXT/SEEK+ . 6 PREVIOUS/SEEK. , : , . , , ST/PROG «ST ON», LOC/RDM . . , . . , .
«LOC OFF» . , . (1-6) . (1-6). FM APS FM APS M 3 . . 3 . . APS FM , AMS . APS AMS , FM , EON ( . ) EON , , . , , , . .
AF ( ) 7/AF , (ON) (OFF) AF. AF. , AF ON , ON ( . , . .) TA ( ) 8/TA . ; , TA, SEL «TA SEEK». SEEK 2 , TA VOL/SEL TA ALARM; . TA SEEK 8/TA; TA ALARM TA/TP PTY - PROGRAM TYPE ( . ) , . 9/PTY 9/PTY (1-6), , . . , . . .
DVD . , . , «LOAD», . . , . 5 EJECT, . , . ( ) 1/OSD OSD . . , . . DVD . . . PBC/MENU . , TITLE . NEXT . . NEXT .
PREVIOUS . . PREVIOUS , , . . PREVIOUS/SEEK- NEX/SEEK+ . SETUP ( . 1-6 6 ) . . 1: OSD 1 . 3 . 2: 2 . 3 . «RPT». . . 3: (Intro) . 3 15 3 “INT". . . : Intro DVD .
4: 4 . 3 . . «RDM». : DVD . 5: 5 3 . . . 6: SETUP/ 6 6 . 1-5 . . 3 . . AUDIO . ( ). . SUB-T . ). ( .
GOTO . . , . ENTER . +/ZOOM . 2 4 ( SLOW 7 ). . 1/2 1/8. PLAY/PAUSE. ANGLE . . : . , , , . «INVALID KEY». BND/SYS : NTSC, PAL, PAL60, AUTO. ( , 66 AUTO. ).
ST/PROG . . . ST/PROG . (ESP) . DVD– 5 67 (ESP) .
, . MP3, WMA, JPG DivX, , . ENTER . . ENTER . , . JPG ENTER . . . jpg . MP4, MPEG4 (*.avi). . , . NEXT . . NEXT . PREVIOUS . . PREVIOUS 68 , . .
, , . PREVIOUS/SEEK- or NEXT/SEEK+ . 1-6 1-6 , , , . , . 5 , .
VCD/CD/ 3 . , . , «LOAD», . EJECT, , . . , 5 , . CD CD . . NEXT . . NEXT . PREVIOUS . . PREVIOUS , , . . PREVIOUS/SEEK- or NEXT/SEEK+ . 1-6 1-6 , , 70 .
AUDIO . ( ). VCD: . AUDIO . . ) --> ( AUDIO CD: )--> ( )--> ( . : )--> ( ) . ) --> ( )--> ( : ) VCD2.0 MENU/PBC . (ESP) . , (ESP) VCD, CD - 10 . 71 , MP3 - 120 .
AUX in, RCA, SUB out, USB/SD AUX AUX . ) RCA AUX IN. RCA . MODE VOL/SEL AUX. . RCA RCA ( , = RCA ( . ). , , = ). . ( , . ). RCA. . . AUX. , AUX.
( . ). ) ( ( ) , . . , . USB BND/NP/SUB PAL NTSC. SD USB SD- . . MP4, DivX, JPG. MODE USB SD : MP3, . , , 73 .
SETUP , , ENTER, : , , , , . « : 74 ». 3 . .
: INTERLACE-YUV. 4:3 PS: 4:3 LB: 4:3. 4:3, . 16:9: 16:9. 0000. 75 . .
1 8: (1) (8) . . :8 : , . , . .
. DVD .( ). . DVD . DVD 77 . ( ). . ( ).
. : . SPDIF/ RAW: . SPDIF/ PCM: . . .
. . . .
: LINE OUT: RF REMOD: . . . «line out», , . «Full», , «Off», . : .
Bluetooth PHONE, «PAIRING». bluetooth «BT car stereo». . . «0000» . bluetooth; . , , ANSWER, PHONE 1-0 . . , , : END CALL. bluetooth , 15 ANSWER . . PHONE VOL/SEL , “DIS CONN”. SEL, ; . .
ANSWER, , . . , . END CALL «Hang up». , . . , , bluetooth bluetooth , , ), bluetooth . , Melody ( ANSWER, . ) PHONE, MELODY 1. VOL/SEL, VOL/SEL, 1-6 . PHONE “MELODY”, VOL/SEL «TEL» VOL/SEL, 0 39.
A2DP . , bluetooth». « . “BT PLAY” , , : A2DP A2DP , , ( ). 83 . .
, ( ). , . , , . , . ( , ). . , , . , . , .
. ( , ), , . . , , , . . , , . .
. , “ ”. . . . , . . . . . , . . . . . . RESET. . . 30 . . , 30 . . . . . . . .
: : : ( ESP: ): 12 10 A 1 A 50 4 178 x 51 x 178 mm 10 CD/120 c MP3 FM : : 87.5 - 108.0 12 18 : 522 12 : MW : – 1620 DVD : DVD/SVCD/VCD/HDCD/MP3/MPEG 4/WMA/CDDA/JPEG/DVD Audio/USB/SD/MMC DVD±R/±RW/CD/CD-R/CD-RW NTSC/PAL/NTSC/24 /96 : : : 16:9 4:3 1,0 /75 500 : ( .
: 20 80 - 20 /50 : Bluetooth RCABluetooth (2V) V 1.2/2.0 . .
