Operation and maintenance manual

www.changlin.com.cn


97/167
pages

14 mm, 16 mm
Position the alternator and install the mounting
capscrew. Torque Value:
(A) 24 N • m [18 ft-lb]
(B) 43 N• m [32 ft-lb]
13 mm
Install the drive belt.
NOTE: After the tensioner has been raised to
remove/in- stall the belt, check the torque of the
tensioner cap screw. Torque Value: 43 N• m [32 ft-lb]
Fill the cooling system. Operate the engine and
check for leaks.
Caution: Be sure to vent the engine and after
cooler during filling, to remove air from the
coolant system or over-heating will result.