Operation and maintenance manual
www.changlin.com.cn
92/167
pages
13 mm
Install the belt tensioner.
Torque Value: 43 N*m [32 ft-lb]
FanPulley‐Replacement
Preparatory Steps:
• Remove the drive blet.
NOTE: Loosen the capscrews before removing the belt and torque the capscrews after the belt is
installed.
10 mm and 13 mm
Remove the four capscrews, fan and spacer.
Replace the fan pulley.
Torque Values:
8 mm Capscrews-24 N • m [18 ft-lb]
10 mm Capscrews-43 N • m [32 ft-lb]
WaterPump‐Replacement
Preparatory Steps:
•Drain the coolant.
•Remove the drive belt.