Operation and maintenance manual

www.changlin.com.cn


54/167
pages

Mark the pulley and rotate the crankshaft 360 degrees.
Caution: To prevent engine or pin damage, be sure timing
is disengaged.
14 mm, Flat blade Screwdriver
Adjust the valves as indicated in the illustration.
Tighten the lock nut and measure the valve lash again.
Torque Value: 24 N*m [18 ft-lb]
Six‐CylinderEngineAdjustment
14 mm, Flat blade Screwdriver
Locate Top Dead Center (TDC) for Cylinder
Number 1. Check / adjust the valves as
indicated in the illustration (I = Intake; E =
Exhaust).
Mark the pulley / vibration damper and rotate
the crankshaft 360 degrees.
Caution: To prevent engine or pin damage,
be sure timing pin is disengaged.