Operation and maintenance manual

www.changlin.com.cn


50/167
pages

HighPressureLines(Rotaryand‐In‐linePumps)
Venting
17 mm, 19 mm
Warning: The pressure of the fuel in the line is sufficient
to penetrate the skin and cause serious bodily harm.
Venting is accomplished by loosening one or more
fittings at the injectors and cranking the engine to allow
entrapped
Re-Tighten Line Fittings
Torque Value: 30 N*m 122 ft-Ib]
Warnig: Do not bleed a hot engine as this could cause
fuel to spill onto a hot exhaust manifold creating a
danger of fire.
Start the engine and vent one line at a time until the
engine runs smoothly.
AntifreezeConcentration
Check
Check the antifreeze concentration. Use a mixture of 50
percent water and 50 percent ethylene-glycol base
antifreeze to protect the engine to -37°C [-34°F] year
around.
Antifreeze is essential in any climate.
It broadens the operating temperature range by lowering
the coolant freezing point and by raising its boiling point.
The corrosion inhibitors also protects the cooling system
components from corrosion and provides longer
component life.