Operation and maintenance manual

www.changlin.com.cn
44/167
pages
Cleaning
Flush the CAC internally with solvent in the opposite direction of
normal air flow Shake the CAC and lightly tap on the end tanks with a
rubber mallet to dislodge trapped debris. Continue flushing until all
debris or oil is removed.
Caution: Do not use caustic cleaners to clean the CAC.
Damage to the CAC will result.
After the CAC has been thoroughly cleaned of all oil and
debris with solvent, wash the CAC internally with hot soapy
water to remove the remaining solvent. Rinse thoroughly
with clean water.
Blow compressed air into the CAC in the opposite direction
of normal air flow until the CAC is dry internally.
Refer to the vehicle manufacture's instructions for installation
procedures.